Panasonic CJ-HDR216 User Manual

Also see for CJ-HDR216: Quick start guide

192 PTZ decoder setup, connection or installation is not correct. Cable connection is not correct. PTZ setup is not correct. PTZ decoder and DVR protocol is not compatible. PTZ decoder and DVR address is not compatible. When there are several decoders, please add 120 Ohm between the PTZdecoder A/B cables furthest end to delete the reverberation or impedancematching. Otherwise the PTZ control is not stable. The distance is too far.12. Motion detection function does not work.There are following possibilities: Period setup is not correct. Motion detection zone setup is not correct. Sensitivity is too low. For some versions, there is hardware limit.13. Cannot log in client-end or web.There are following possibilities: For Windows 98 or Windows ME user, please update your system to Windows2000 sp4. Or you can install client-end software of lower version. Please noteright now, our DVR is not compatible with Windows VISTA control. ActiveX control has been disabled. No dx8.1 or higher. Please upgrade display card driver. Network connection error. Network setup error. Password or user name is invalid. Client-end is not compatible with DVR program.14. There is only mosaic no video when preview or playback video file remotely.There are following possibilities: Network fluency is not good. Client-end resources are limit. There is multiple-cast group setup in DVR. This mode can result in mosaic.Usually we do not recommend this mode. There is privacy mask or channel protection setup. Current user has no right to monitor. DVR local video output quality is not good.15. Network connection is not stable.There are following possibilities: Network is not stable. IP address conflict.