Panasonic CJ-HDR216 User Manual

Also see for CJ-HDR216: Quick start guide

81Please enable the SNMP function. Use the corresponding software tool (MIB Builder andMG-SOFT MIB Browser. You still need two MIB file: BASE-SNMP-MIB, DVR-SNMP-MIB)to connect to the device. You can get the device corresponding configuration informationafter successfully connection.Please follow the steps listed below to configure. In Figure 4-69, select the checkbox to enable the SNMP function. Input the IP addressof the PC than is running the software in the Trap address. You can use default setupfor the rest items. Compile the above mentioned two MIB file via the software MIB Builder. Run MG-SOFT MIB Browser to load the file from the previous step to the software. Input the device IP you want to manage in the MG-SOFT MIB Browser. Please setthe corresponding version for your future reference. Open the tree list on the MG-SOFT MIB Browser; you can get the deviceconfiguration. Here you can see the device has how many video channels, audiochannels, application version and etc.NotePort conflict occurs when SNMP port and Trap port are the same.4.10.2.10 MulticastMulticast setup interface is shown as in Figure 4-70.Figure 4-70Here you can set a multiple cast group. Please refer to the following sheet for detailedinformation. IP multiple cast group address-224.0.0.0-239.255.255.255-“D” address space