Appendix B. CPC-AII/B 8.0 Feature Update Section 300-InstallationPage B-10 DBS Manual - Revised April 2000 DBS-2.3/9.2-300Operation To Program Voice Mailbox Access Codes into the MSG Key:Press PROG MSG [16-digit number] HOLDThe display will reflect “Regist Data”.To Confirm a Voice Mailbox Access Code Programmed into theMessage Key..Press CONF MSG.The programmed access code will be displayed.Notes Operation With Message Waiting Indicator. The Message WaitingIndicator on the phone’s upper right corner will flash whenever a callbackmessage or voice message has been received.Operation During Call States. The MSG key will work only when thephone is idle, receiving dial tone, or in Directory Mode (via select key).Operation If Phone Has Both a Callback Message from anotherExtension and a Voice Message. Messages are accessed in a First In, FirstOut order. If the callback message was received before the voice message,then pressing the MSG key will activate Auto-Callback first. Likewise, ifthe voice message was received before the callback message, pressing theMSG key will access your Voice Mailbox.Interaction with Tone-Calling Mode. If an Auto-Callback is placed to aphone that is in tone-calling mode (i.e., not voice-calling), that phone mustanswer or the message canceled before another message can be accessed.FF-Key Restriction. These MSG features cannot be assigned to an FF-key.Reprogramming the MSG key if Extension Number Digits is changed. Ifthe DBS is reprogrammed to use a different extension numbering plan (i.e.,changed from 2-digit to 3-digit extensions, 3-digit to 4-digit extensions,etc.), the Voice Mailbox Access Code must be reprogrammed into theMSG key.DSS/72 Console - Key Arrangement44-Series phones onlyCPC-AII/B Version 8.0, CPC-S/M Version 2.0, or CPC-EX Version 1.0 onlyDescription The keys on the enhanced DSS/72 Console (VB-44320) are arrangeddifferently from the VB-43320 model. The enhanced DSS console has 6
