12 CQ-C800UiPod ControlConnection of the optional direct cable for iPod (CA-DC300U) allows users to operate the iPod including file selection and filesequence change with the buttons on this unit.1 Connect the iPod.2 Press [SOURCE] to select the iPodmode. Playback starts.Note: If playback does not start, press [BAND] (y / 5).3 Select a desired portion.File Selection[7]: Next file[6]: Beginning of the current fileFor the previous file, press twice.Note: Hold down for fast forward/reverse.PausePress [BAND] (y / 5).Press again to cancel.The type with which playback data is classified isselectable.1 Press [}] (LIST) to call up the playmode selection screen.2 Turn [VOL] to select the play mode.: Playback by playlist: Playback by artist: Playback by albumFor using the remote control, use [}] or [{].Note: When the []] button is pressed, the regularscreen appears.3 Press [PUSH SEL] to determine theselection.For using the remote control, use [BAND] (SET).4 Turn [VOL] to select the portion to play.Notes:¡ For selecting ARTIST, the ALBUM selectionscreen appears after selecting an artist name.¡ When the []] button is pressed, the previousscreen appears.5 Press [PUSH SEL] to determine theselection.For using the remote control, use [BAND] (SET).Note: Files without an album name or an artistname are not playable in the playing mode of thealbum or artist display respectively.Operation FlowPlaying Mode selectioniPod Mode Display Current fileTimelights when the direct cablefor iPod (CA-DC300U) isconnected.*Even when the iPod itselfis not connected, thisindicator will also light.This indicates that the mainunit normally operates.Play Mode indicatorslights when each mode is activated.iPod number(iPod 1)(iPod 2)(Random)(Repeat)(Album Random)OPENDISPBANDTILT/SET/APMSQMENUTUNETRACKMUTE D・MSBC-SWFOLDER /P-SET/DISCLISTSOURCEPWR/DIMVOLPUSHSEL/SRSWOWCQ-C800UOPENDISPBANDTILT/SET/APMSQMENUTUNETRACKMUTE D・MSBC-SWFOLDER /P-SET/DISCLISTSOURCEPWR/DIMVOLPUSHSEL/SRSWOWCQ-C800U