16 CQ-C800USelection by CategoryFunctions Only byRemote Control Unit Direct AccessA channel can be directly selected.Example: channel number 51 Press [#] (NUMBER).2 Press [5].3 Press [SET].Note: To suspend direct selection, press [DISP](DISPLAY).You can toggle the category on and off every time youhold down [BAND] for 2 sec. or more. If the category isset to on, the unit operates as follows for each button:Do not set Category to ON while receiving Channel 1.Failure to observe this disables channel change.Channel selection[]] (TUNE): Preceding channel in current category[[] (TUNE): Next channel in current categoryCategory selection[{] (P-SET: Preset): Preceding category[}] (P-SET: Preset): Next categoryTEXT Setting (XM Receiver Menu Display) 1 Press [MENU] to display the menu dis-play.For using the remotecontrol, hold down[SEL] (MENU) for 2sec. or more.2 Press [PUSH SEL] to adjust.For using the remotecontrol, use [BAND](SET).3 Press [MENU] to close the menuscreen.For using the remote control, hold down [SEL](MENU) for 2 sec. or more.TEXTText display: Enabled (default): DisabledXM Receiver (continued)lights when the category is set to on.OPENDISPBANDTILT/SET/APMSQMENUTUNETRACKMUTE D・MSBC-SWFOLDER /P-SET/DISCLISTSOURCEPWR/DIMVOLPUSHSEL/SRSWOWCQ-C800USQMENUTUNETRACKMUTE D・MSBC-SWFOLDER /P-SET/DISCLISTSOURCEPWRDIMVOLPUSHSEL/SRSWOWSQMENUTUNETRACKMUTE D・MSBC-SWFOLDER /P-SET/DISCLISTSOURCEPWRDIMVOLPUSHSEL/SRSWOW