Panasonic CQ-C800U System Upgrade Manualbook

Also see for CQC800U - AUTO RADIO/CD DECK: Operating instructions Manual de instrucciones

Contents

18 CQ-C800U1 Press [SOURCE] to select the SiriusSatellite Radio mode.2 Press [BAND] to select a band.Notes:¡ “– – – –” is displayed when there is no informa-tion.¡ “UPDATING” is displayed when channel informa-tion is updated.3 Select a channel.Channel selection[]] (TUNE): Preceding channel[[] (TUNE): Next channelNote: When you select a locked channel, hold down[#] on the remote control for 2 sec. or more. PASS-CODE entering display will appear.Preset channel selection[{] (P-SET: Preset): Lower preset channel[}] (P-SET: Preset): Higher preset channelNotes:¡ Direct selection can be executed with [1] to [6]buttons on remote control.¡ A preset station is selectable by turning [VOL]and pressing [PUSH SEL] while the preset listscreen is present on the monitor.¡ The volume is not adjustable while the preset listscreen is present on the monitor.Up to 6 channels can be preset in SR1 to SR3respectively.Preset channels can be simply called up by pressing[}] (P-SET) or [{] (P-SET).Note: Direct selection can be executed with [1] to [6]buttons on remote control.1 Tune into a channel.2 Hold down [}] or [{] for 2 sec. or more.3 Turn [VOL] to select a preset number.4 Hold down [PUSH SEL] for 2 sec. ormore, and the channel is written on theselected preset number.Preset number/channel number blinks once.Notes:¡ In step 2, a channel can be registered by holdingdown the numeric button [1] to [6] on remote controlfor 2 sec. or more.¡ To stop presetting channels, press [DISP:DISPLAY].¡ The operation above allows users to replace the cur-rent channel with the channel preset in the selectednumber while selecting a preset channel.Sirius Satellite Radio ReceiverSelection by Category You can toggle the category on and off every time youhold down [BAND] for 2 sec. or more. If the category isset to on, the unit operates as follows for each button:Channel selection[]] (TUNE): Preceding channel in current category[[] (TUNE): Next channel in current categoryCategory selection[{] (P-SET: Preset): Preceding category[}] (P-SET: Preset): Next categorylights when activated.OPENDISPBANDTILT/SET/APMSQMENUTUNETRACKMUTE D・MSBC-SWFOLDER /P-SET/DISCLISTSOURCEPWR/DIMVOLPUSHSEL/SRSWOWCQ-C800UOPENDISPBANDTILT/SET/APMSQMENUTUNETRACKMUTE D・MSBC-SWFOLDER /P-SET/DISCLISTSOURCEPWR/DIMVOLPUSHSEL/SRSWOWCQ-C800UOperation FlowChannel Preset(P-SET: Preset)