20 CQ-C800UHands-Free Phone SystemPreparationConnecting Hands-Free Phone SystemConnect the Hands-Free Phone System (CY-BT100U) andestablish the pairing. Refer to the operating instructionsfor the Hands-Free Phone System for further information.Note: This unit is designed only for receiving calls.It cannot send calls.1 Press [Hang-on] on the Bluetoothhands-free kit and pick up the phone.The phone is in the incoming state.2 Adjust the volume if necessary.3 Press [Hang-up] on the Bluetoothhands-free kit and hung up the phone.Adjust the ring volumeThe ring volume is adjustable from this unit.(Setting range: OFF/LOW/MID/HIGH, Default: MID)[}]: up[{]: downNotes:¡ The ring volume is adjustable only when receivingcalls.¡ The ring volume is adjustable only when the phonering comes out of the main unit.¡ The ring volume is also adjustable by turning [VOL].Reject callsPressing [Hang-up] allows users to reject a call whenthe call is coming in.Bluetooth disconnection/reconnectionPressing [Hang-up] allows users to temporarilydisconnect when the phone is in the waiting state.Pressing [Hang-up] allows users to reconnect when theBluetooth unit is temporarily disconnected.Operation FlowStatus indicator (Blue LED)Lights: Call waiting/TalkingStays out: Not connectedBlinks rapidly: Receiving a callBlinks slowly: Pairing/Reconnecting[Hang-on]/Blue LED[Hang-up]/Red LEDSwitch UnitOPENDISPBANDTILT/SET/APMSQMENUTUNETRACKMUTE D・MSBC-SWFOLDER /P-SET/DISCLISTSOURCEPWR/DIMVOLPUSHSEL/SRSWOWCQ-C800UBe sure to read “Safety Information” in the Operating Instructions for the Hands-Free Phone System before use.