Panasonic CS-NZ9SKE Service Manual

Also see for CS-NZ12SKE: Operating instructions

Contents

Panasonic CS-NZ9SKE Service Manual Manual pdf 67 page image

6714.5 Quiet Operation (Cooling Mode/Cooling Area of Dry Mode) Purposeo To provide quiet cooling operation compare to normal operation. Control conditiono Quiet operation start condition When “POWERFUL/QUIET” button at remote control is pressed twice.QUIET will be shown on remote control display.o Quiet operation stop condition When one of the following conditions is satisfied, quiet operation stops: POWERFUL/QUIET button is pressed again. Stop by OFF/ON switch. Timer “off” activates. ECONAVI button is pressed. When quiet operation is stopped, operation is shifted to normal operation with previous setting. When operation mode is changed, quiet operation is shifted to quiet operation of the new mode. During quiet operation, if timer “on” activates, quiet operation maintains. After off, when on back, quiet operation is not memorised. Control contentso Fan speed is changed to Lo-.14.6 Quiet Operation (Heating) Purposeo To provide quiet heating operation compare to normal operation. Control conditiono Quiet operation start condition When “POWERFUL/QUIET” button at remote control is pressed twice.QUIET will be shown on remote control display.o Quiet operation stop condition When one of the following conditions is satisfied, quiet operation stops: POWERFUL/QUIET button is pressed again. Stop by OFF/ON switch. Timer “off” activates. ECONAVI button is pressed. When quiet operation is stopped, operation is shifted to normal operation with previous setting. When operation mode is changed, quiet operation is shifted to quiet operation of the new mode, exceptfan mode only. During quiet operation, if timer “on” activates, quiet operation maintains. After off, when on back, quiet operation is not memorised. Control contentso Fan speed manual Fan speed is changed to Lo-.o Fan Speed Auto Fan speed is changed to Lo-.14.7 Powerful Mode Operation When the powerful mode is selected, the internal setting temperature will shift lower up to 1°C (for Cooling/SoftDry) or higher up to 1.0°C (for Heating) than remote control setting temperature to achieve the settingtemperature quickly.