7014.7 Timer Control There are 2 sets of ON and OFF timer available to turn the unit ON or OFF at different preset time. If more than one timer had been set, the upcoming timer will be displayed and will activate in sequence.14.7.1 ON Timer Control ON timer 1 and ON timer 2 can be set using remote control, the unit with timer set will start operate earlier thanthe setting time.This is to provide a comfortable environment when reaching the set ON time. 70 minutes before the set time, indoor (at fan speed of Lo-) and outdoor fan motor start operate for 30 seconds todetermine the indoor intake air temperature and outdoor air temperature in order to judge the operation startingtime. From the above judgment, the decided operation will start operate earlier than the set time as shown below.Indoor intake airtemperature (o C)Outdoor airtemperature (o C)3030 35Cooling/Dry(o C)10 min15 min5 min25Indoor intake airtemperature (o C)Outdoor airtemperature (o C)150 5Heating(oC)30 min20 min40 min514.7.2 OFF Timer ControlOFF timer 1 and OFF timer 2 can be set using remote control, the unit with timer set will stop operate at set time.14.7.3 Sleep Timer Sleep operation is performed according to the delay OFF time (0.5, 1, 2, 3, 5, 7, or 9 hour) and providecomfortable environment by shifting set temperature. This will automatically adjust the temperature to prevent your body from being cooled down or warmed up toomuch.Sleep timersettingAll offMaximum 9hrStatus 1 Status 2 Status 3 Status 4Go to status 2 whenpreset temperature isreached or after 1hrsleep timer has beenoperatedGo to status 3 afterA hourGo to status 4 after 7hrsleep timer has beenoperated or Time B isreachedHeating Cooling, DryA 2hr 3hrB *5am *4am* According to remote control clock