Panasonic CS-VZ9SKE Service Manual

Also see for CS-VZ12SKE: Operating instructions Operating instructions

Contents

Panasonic CS-VZ9SKE Service Manual Manual pdf 73 page image

7314.10 Info Function Purposeo To check the energy charging level.o To check the diagnosis code for malfunction. To check the energy charging level.o Air conditioner must be operate in heating mode.o Press Info INFObutton on the remote controller to check energy charging level.o Display will be indicate of the storage of heat that can be used in the non-stop defrost operation.o Energy charging level (0~4).o Energy charging level will be displayed on the remote controller display for 4 seconds then it will return to theoriginal display.o When press the info button in any operation except heating, remote control will display as “__”. To check the diagnosis code for malfunction.o Once abnormality has occurred during operation, the unit will stop its operation and Timer LED blinks.o Press Info INFObutton on the remote controller to check diagnosis code. “beep, beep, beep, beep” sound can be heard and display "diagnosis" then show alphanumeric (H□□ or F□□). Diagnosis code will be displayed on the remote controller display for 4 seconds then it will return to the originaldisplay.14.11 Indication PanelLED POWER TIMER +8/10ºC nanoe/ODOR CLEANUP ECONAVIColor Green Orange Green Blue GreenLight ON Operation ON Timer Setting ON +8/10ºC HEAT ON nanoe /ODOR CLEANUP ON ECONAVI ONLight OFF Operation OFF Timer Setting OFF +8/10ºC HEAT OFF nanoe /ODOR CLEANUP OFF ECONAVI OFFNote: If Operating LED is blinking, the possible operation of the unit are HOT Start, during Deice operation, operationmode judgement, or ON timer sampling. If Timer LED is blinking, there is an abnormality operation occurs.