Panasonic CY-VHD9401N Operating Instructions Manual

Also see for CY-VHD9401N: Installation instructions Installation instructions

Panasonic CY-VHD9401N Operating Instructions Manual Manual pdf 20 page image

122 CY-VHD9401N CY-VHD9401N 123Other (USER) SettingsNote:≥ If no operation takes place for more than 10 seconds,the display exits the menu.1 MenuVideo Control Setting(DVD Changer)After this setting is made, inserting a discto a connected DVD changer (CX-DH801N,option) automatically changes to the DVDchanger mode.Default: VTR1Setting value: VTR1, VTR23 SettingButton Operation SoundDefault: ONSetting value: ON/OFFAudio Output LevelDefault: 3Setting value: 1/2/31 Press [MENU]to display the menu.2 Press [%] or [$]to select “USER”.USERVIDEO-CONTBEEPOUTPUT LEVEL2 SubmenuSelectSelectSelectSelect1 Press [%] or [$] to adjust.2 Press [ENTER] to set.3 Press [SRC] (Source) to exit the menu.ON: Operation sound (Beep) ONOFF: Operation sound (Beep) OFF1: Minimum level2: Middle level3: Maximum level1 Press ["] or [#] to selectthe item.2 Press [ENTER].VTR1: Connected to the VTR1-INVTR2: Connected to the VTR2-IN≥ This “Video Control Setting” is requiredwhen you connect a Panasonic DVDchanger (CX-DH801N, option).Memory ClearDefault: NOSetting value: YES/NO MEMORY CLEAR?SelectYES: Default settingsNO: No memory clearThe display returns to the previous one.SCREESCREENN USERUSERVI DEO-CO-CONTBEEPINPUT SELECTINPUT SELECTOUTPUTPUTT LEVELELMEMORYORY CLEAR?AR?: SELECT ENTER:SELSOURCE : END ENTER: SETSCREESCREENN USERUSER: SELECTVTRTR VTRVTR2 [MENU][ENTER]["] [#][%] [$][SRC] (Source)Note:≥ Select a terminal connected to the DVD outputterminal of a Panasonic DVD changer (CX-DH801N,option) through an RCA cord.≥ When you connect a Panasonic DVD changer(CX-DH801N, option), connect a video control leadas well.Note:≥ The sound may be distorted depending on the inputsensitivity of the external device connected. Proceedwith an adjustment only if this is the case. Normally,keep at the default setting.VTR1/2 Input VideoSettingDefault: PALSetting value: PAL/NTSCINPUT SELECTSelectPAL: PAL video formatNTSC: NTSC video format≥ Select PAL or NTSC in accordance with equipmentconnected to the VTR1 and VTR2 terminals.ENGLISH25ENGLISH26