Panasonic CZ-256ESMC2 Operation Manual

Also see for CZ-256ESMC2: Operation manual Operation manual

Contents

476 Using the System6.6.2 Displaying distribution ratios and energy usage by tenantUse this screen to check the distribution ratios and energy usage by tenant.ProcedureSelect 3.Distrib. ratio/Usage in the main menu and 2.Each tenant in the sub menu.*When “No Distrib.” is selected, this screen is not accessible. (see Main Sub1155 )1 Selects the distribution group to display.2 Selects either the current or the past (maximum 24 months) cut-off data.3 Selects the time zone to display.4 Switches the gas distribution ratio and gas usage display between values for air conditioningand values for power generation.When “Gas usage” is displayed: Gas distribution ratios and usage for air conditioning areshown.When “Gas use/PwrGen” is displayed: Gas distribution ratios and usage for power generationare shown.For air conditioning units without a power generation feature, “ – ” appears under gas usage forpower generation and gas distribution ratio.31.Status/Control2.Total data/Cut-off3.Distrib. ratio/Usage4.Maintenance/Test Run5.Initial settings6.Auxiliary settings1.Each I/D unit2.Each tenant1.All hours2.Regular hours3.Out of hours4.Special Day1 24• If the product type is HOT Multi, unit amount will be displayed in m 3 or liters.• If no pulse meter is connected, power usage and gas usage are not displayed.• Gas usage and distribution ratios are not displayed for PAC units.Main Sub2233