Panasonic CZ-256ESMC2 Operation Manual

Also see for CZ-256ESMC2: Operation manual Operation manual

Contents

706 Using the Systembl Input the IP address of the primary and secondary DNS servers as necessary.bm Input the IP address of the primary and secondary WINS servers as necessary.bn Input the Intelligent Controller’s device name (device ID) (within 15 characters).(This is used to identify the Intelligent Controller when using DNS, for example.)bo For details on the mail server settings, see “6.8.10.1 Detailed server settings”.* Refer to the network administrator for confirmation of detailed mail and network settings.* If a Web browser (on PC) was used to change any of the settings from 7 to bn, the “Network settings havechanged. Restart the unit.” message appears and the Intelligent Controller restarts automatically.* If you change the settings for items 7 and bn, the system restarts so that the new settings are reflectedwhen you switch to other screens.* You cannot set the IP address to “0.0.0.0” or “255.255.255.255”. You cannot set the subnet mask, defaultgateway, DNS, or WINS to “0.0.0.0”.6.8.10.1 Detailed server settingsFrom the “WEB settings” screen ( Main Sub66 1010 ), clicking the “Server details” button displays thefollowing screen.This screen enables you to use the same and actual mail server settings to set up the IntelligentController as well. Therefore, check your mail server settings in advance and then apply the samesettings to the Intelligent Controller.128345671 Specify a port to use for sending mails, using a number within 6 digits.2 Select an encryption type to use for sending mails: “None”, “SSL”, “TLS”, or “STARTTLS”.3 Select this check box if you want to perform authentication during mail transmission.Settings 4 to 8 below are valid only when you have selected this check box.Main Sub66 1010