Panasonic D-SNAP SV-AS30 Operating Instructions Manual

Contents

100VQT0N05Q (Question) A (Answer)The clock is not setcorrectly.If you do not use this unit for a long period of time,the clock may be reset. When the screen of clocksetting appears, set the clock again.If you record pictures without the clock setting, thedate is recorded as [1/1/2000 0:00].The retouchsoftware does notstart even if retouchfiles (extension“.ped”) are clickedon WindowsExplorer etc.If both SD Viewer supplied with this unit andSD Viewer Ver. 2.1E supplied with SD Multi CameraSV-AS10 are installed in the PC and uninstall eitherof them, the association of retouch files withSD Viewer will be disabled. In this case, uninstallboth versions of SD Viewer and then install the oneyou want to use again.When this unit isconnected to thePC, the CardAccess Lampkeeps blinking.Did you insert an NTFS-formatted Memory Cardinto this unit? In this case, log on with [Administrator(computer administrator)] (or any other user namehaving equivalent rights), right-click the RemovableDisk icon in [My Computer], and select [Remove].Check that the Card Access Lamp is lit and thencancel the connection between this unit and the PC.[Found NewHardware Wizard]appears though thisunit is connected tothe PC after theUSB driver isproperly installed.1 Click [Next].2 Confirm whether your device is configured to theoptimal driver detection setting and click [Next].3 Insert the supplied CD-ROM into the CD-ROMdrive.4 Enter the path as “D:\USB Driver\files” (exampleof D drive assigned as CD-ROM drive.)5 Click [Next].6 Click [Next].7 Click [Finish].After the procedure above, follow the wizard toinstall the hardware.Others (continued)