90VQT0N05When condensation has taken place≥ Turn this unit off and leave this unit in this condition for about 1 hour.When this unit becomes close to the ambient temperature, thecondensation disappears naturally.≥ When you move this unit from a cold place to a hot place, put thecamera into plastic bag and then take it out after the temperature ofthis unit becomes close to the ambient temperature to avoidcondensation.≥ In a place with drastic temperature changes, condensation may formon the LCD Monitor. Wipe it with a soft, dry cloth.≥ Do not press the LCD Monitor strongly. It may cause uneven colourson the LCD Monitor or a malfunction of the LCD Monitor. Or, do nottouch a hard object to the LCD Monitor. It causes scratches on thesurface of the LCD Monitor.≥ When the Lens is aimed to contrasty subject, the picture may lookuneven or after images may appear on the LCD Monitor. This is not amalfunction.≥ If the SD Multi Camera is extremely cold when you turn this unit on,the image on the LCD Monitor is slightly darker than usual. However,as the internal temperature increases, it goes back to the normalbrightness.LCD MonitorExtremely high precision technology is employed to produce theLCD Monitor screen featuring a total of approximately 61,600 pixels.The result is more than 99.99% effective pixels with a mere 0.01% ofthe pixels inactive or always lit. However, this is not a malfunctionand does not affect the recorded picture.Cautions for Use (continued)