91VQT0N05When the Card Access Lamp is blinking (or when the message[ACCESSING CARD] appears), do not open the Card/Battery Doorto remove the card, turn this unit off, or subject it to vibration orimpact.Do not leave the card in places where there is high temperature ordirect sunlight, or where electromagnetic waves or staticelectricity are easily generated. Do not bend, drop, or subject it tostrong vibration.≥ If the above precautions are not taken, the card or the recordedcontent may be damaged.Be sure to remove and store the card after use.≥ Keep the card in the storage bag after use and when you store orcarry the card around.≥ Do not allow dirt, dust or water to enter the terminals on the back ofthe card. Do not touch it with your fingers.≥ Keep the Memory Card out of reach of children to preventswallowing.This unit comply with DCF standards (Design rule for Camera Filesystem) established by the Japan Electronics and InformationTechnology Industries Association (JEITA).≥ If files conforming to DCF standard are deleted, all the data relatedto the files will be deleted.≥ If you delete [Picture] or [MPEG4] files, all the data related to the fileswill be deleted.≥ As a result of improper operations, recorded data may be damagedor erased. We are not responsible for the loss caused by the erasureof the recording data. Please note it beforehand.CardRecorded Files
