Panasonic DBS-576 Technical Manual

Also see for DBS 576 Section 300: User guide Technical manual Technical manual Technical manual User guide

Contents

Panasonic DBS-576 Technical Manual Manual pdf 23 page image

Section 510: Built-In Voice Mail w/2-Way Call Recording Chapter 1. Installation and Initialization576-25-510 (VM Version 2.0) DBS 576 (USA) issued March 1999 • 1-3FF1SystemFF2TrunksFF3ExtensionsFF4FF-/Soft KeysFF5GroupsFF6TRS/ARS1 Installing& InitializingFF7ApplicationsFF8MaintenanceIntroductionAppendix AAppendix BFF1SystemFF2TrunksFF3ExtensionsFF4FF-/Soft KeysFF5GroupsFF6TRS/ARS0 SystemConfigurationFF7ApplicationsFF8MaintenanceIntroductionAppendix AAppendix BPlanning The InstallationInstallation Precautions• For general precautions on installing the phone system, refer to Section 300-Installation of the DBS 576 Technical Manual.• The VM Unit’s hard disk drive (HDD), located on the VSSC card, is susceptible toimpact or vibration which could cause a fault in the unit. To prevent this damagefrom occurring, make sure of the following before transporting the unit to theinstallation site:* The HDD is detached from the VSSC card, and hermetically sealed in anelectrostatic-proof polyethylene bag.* The HDD is placed in a packing box with packing material that providesadequate cushion against jarring, dropping, or bumping of the box.• If the temperature of the open air and the installation site differs by more than 18°F(10°C), a sudden change in temperature could cause moisture to form on VM Unitcomponents, leading to faulty operation of the unit. To avoid this type of damage,leave the components sealed in their polyethylene bags for at least one hour at theinstallation site before opening them.Notes For Single-Cabinet Systems• The VSSC Card must be installed in Free Slot 11 ("FS11") of CAB-96, or FS5 inCAB-40.• The VPU/4 and/or VPU/8 Card(s) must be installed in FS9 and/or FS10 within thesame CAB-96. In CAB-40, the VPU/4 or VPU/8 card goes in FS4.• (CAB-96 only) If using only one VPU card, install it in FS10.