Panasonic DIGA DMR-BW750 Operating Instructions Manual

Contents

Panasonic DIGA DMR-BW750 Operating Instructions Manual Manual pdf 45 page image

45RQT9428PlayingbackTo enjoy High Bit rate Audio and VideoEnjoying High Bit rate Audio with 7.1ch speakerThis unit can decode high bit rate audio (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio) adoptedin BD-Video.To enjoy 7.1ch surround sound, the following conditions are necessary (Part shown in the shaded area of table given below).y Connect an amplifier/receiver with 7.1ch speaker supporting HDMI (High Bit rate Audio) using a High Speed HDMI cable. (➡ 100)y Set “BD-Video Secondary Audio” to “Off” in the Setup menu. (➡ 91)y Set “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” to “Bitstream” or “PCM” in the Setup menu. (➡ 91)About audio from audio output terminalConnect an amplifi er/receiver and confi rm the desired audio type and necessary settings (“BD-Video Secondary Audio”, “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD”).y The number of channels listed is the maximum possible number of output channels.y Also, depending on the specifi cations or the settings of the amplifi er/receiver, the results of the output may vary.Terminal HDMI AV OUT DIGITAL AUDIO OUT“Dolby D/Dolby D +/Dolby TrueHD”/“DTS/DTS-HD”“Bitstream”Ú1 “PCM”Ú3 “Bitstream” “PCM”“BD-VideoSecondary Audio” “On”Ú2 “Off” “On” “Off” “On”/“Off” “On”/“Off”Dolby Digital/Dolby Digital EXÚ5Dolby Digital/Dolby DigitalEXÚ6Dolby Digital/Dolby Digital EX 5.1ch PCMDolby Digital/Dolby DigitalEXÚ6Down-mixed 2chPCMDolby Digital Plus Dolby Digital Dolby Digital Plus 5.1ch PCMÚ2 Ú7.1ch PCM Dolby DigitalDolby TrueHD Dolby TrueHDDTS DigitalSurround/DTS-ESÚ5DTS DigitalSurround/DTS-ESÚ6DTS DigitalSurround/DTS-ESDVD-V 5.1ch PCM DTS DigitalSurround/DTS-ESÚ6BD-V 7.1ch PCMÚ4DTS-HD HighResolution Audio DTS DigitalSurroundDTS-HD HighResolution Audio 7.1ch PCMÚ4 DTS DigitalSurroundDTS-HD MasterAudioDTS-HD MasterAudio7.1ch LPCM Down-mixed5.1ch PCM 7.1ch PCM Down-mixed5.1ch PCMÚ2 7.1ch PCM Down-mixed 2chPCMÚ1 When the connected equipment is not supported with these audio format, the audio is output as Dolby Digital bitstream, DTS Digital Surroundbitstream or down-mixed 2ch PCM (e.g., TV).Ú2 BD-V : When playing BD-Video without secondary audio or clicking sound, the audio is output as the same format as if “BD-Video SecondaryAudio” was set to “Off” in the Setup menu. (➡ 91)Ú3 When the connected equipment is not supported with multi channel surround, the audio is output as down-mixed 2ch PCM.Ú4 BD-V : When the connected equipment is supported with 7.1 channel surround, the audio output is amplified from 5.1ch or 6.1ch to 7.1chdepending on the DTS, Inc. specifi cations.Ú5 With PCM output, Dolby Digital EX becomes PCM audio decoded as Dolby Digital, DTS-ES recorded to DVD-Video becomes PCM audiodecoded as DTS Digital Surround, and DTS-ES recorded to BD-Video becomes PCM audio decoded as DTS-ES.Ú6 BD-V : When “BD-Video Secondary Audio” is set to “On” in the Setup menu, Dolby Digital EX is output as Dolby Digital and DTS-ES is outputas DTS Digital Surround, however if playing BD-Video without secondary audio or clicking sound, the audio is output as the original format.Notey When setting “BD-Video Secondary Audio” to “Off” in the Setup menu, the clicking sound on the menu and audio with secondary video inpicture-in-picture mode (➡ 44) cannot be output.Regarding 24p outputMany BD-Video movie contents are recorded in 24 frames/second in accordance with the fi lm materials. However, they will normally be output in60 frames/second in accordance with the display format.These can be output in 24p as the original. Therefore, high-quality video can be enjoyed, such as the improved clarity, enhanced perspective,etc.Preparationy Connect to a TV supporting 1080/24p input via an HDMI cable.y Set “BD-Video 24p Output” to “On” in the Setup menu. (➡ 92)