Panasonic DIGA DMR-BW750 Operating Instructions Manual

Contents

Panasonic DIGA DMR-BW750 Operating Instructions Manual Manual pdf 94 page image

94RQT9428Others(All factory default settings are indicated with underlined text.)Automatic StandbySelect how long the unit remains on when it is not being used.[2 hours] [4 hours] [6 hours] [Off]Remote ControlChange the remote control code on the main unit and the remotecontrol (the two must match) if you place other Panasonicproducts close together.[BD 1] [BD 2] [BD 3]Use “Blu-Ray Disc (BD) 1”, the factory set code, under normalcircumstances.1 Press [e, r] to select the code (“BD 1”, “BD 2” or “BD 3”)and press [OK].To change the code on the remote control2 While pressing [OK], press and hold the numbered button([1], [2] or [3]) for more than 5 seconds.3 Press [OK].■ When the following indicator appears on theunit’s displayThe unit’s remote control codeChange the code on the remote control to match the main unit’s(➡ step 2).NoteExecuting “Shipping Condition” in the Setup menu returns themain unit code to “BD 1”. Change the remote control code to 1(➡ step 2).Clocky Press [OK] to show the following setting.Automatic Clock SettingThis unit usually obtains time and date information from digitalbroadcasts.But, if the time is not set correctly, set it to “Off” and perform“Manual Setting”. (➡ below)[On] [Off]Region SelectionSelect the region where you live to adjust the standard time.y The time contained in the broadcast signal is UTC (Universaltime, coordinated).[NSW/ACT] [Victoria] [Queensland][South Australia] [Western Australia][Northern Territory] [Tasmania]Daylight Saving TimeSelect time offset from the standard time for Summer Time.y Normally select “Auto”.y If there is a gap between displayed time and actual time, setthis function.[Automatic] [0 hour] [+1/2 hour] [+1 hour]Manual Settingy Press [OK] to show the following setting.ClockTime DatePlease set clock manually.OK: store RETURN: leave15 : 45 : 39 1 . 8 . 2008OKRETURN1 Press [w, q] to select the item you want to change.The items change as follows:Hour Minute Second Day Month Year2 Press [e, r] to change the setting.3 Press [OK] when you have finished the settings.The clock starts.Power Save[On] Power consumption is minimized when the unit isturned to standby (➡ 114).[Off] This sets to Quick Start Mode.y “Unit’s Display” (➡ 91) is fi xed with “Automatic” when “PowerSave” is set to “On”, and is changed to “Bright” when “PowerSave” is set to “Off”.System Update (➡ 98)In order to update this unit’s software and to support systemchanges made by broadcasts, this unit periodically performssoftware updates.Press [OK] to show the following settings.Software Update in Standby[On] When you set this unit to standby mode, softwareupdates are downloaded automatically.[Off]Software LicenceInformation about the software license is displayed.DivX RegistrationYou need this registration code to purchase and play DivX Video-on-Demand (VOD) content (➡ 43).Initializey Press [OK] to show the following settings.Shipping ConditionAll the settings except for the ratings level and ratings PINreturn to the factory preset. The timer recording programmesare also cancelled.[Yes] [No]Default SettingsAll the settings other than the tuning settings, clock settings,disc language settings, ratings level, ratings PIN, remote controlcode, and network settings return to the factory presets.[Yes] [No]Changing the unit’s settings