Panasonic DIGA DMR-BW750 Operating Instructions Manual

Contents

Panasonic DIGA DMR-BW750 Operating Instructions Manual Manual pdf 59 page image

59RQT9428With OtherEquipmentDV Automatic RecordingHDD BD-RE BD-R RAM -R -RW(V) +R +RWPreparation1 Turn off the main unit and DV equipment, then connect theequipment with the unit’s DV input terminal (➡ 58).2 Turn on the main unit.y When the output signal from the external equipment is NTSC,change “TV System” to “NTSC” in the Setup menu (➡ 92).1 Turn on the DV equipment, and pauseplay at the point you want recordingto start.The following screen appears.DV Automatic RecordingRec to Blu-ray Disc/DVDRec to HDDRecord from the DV unit?OKRETURNy When the screen is not displayedAfter performing step 11 Press [FUNCTION MENU].2 Press [e, r] to select “Others” and press [OK].3 Press [e, r] to select “DV Automatic Recording” andpress [OK].➡ Go to step 22 Press [e, r] to select “Rec to HDD” or“Rec to Blu-ray Disc/DVD” and press[OK].y It may take a while for the next screen to display whilepreparing to record.3 Press [REC MODE] to select therecording mode.y DR, HG, HX, HE, HL, FR mode cannot be selected.4 Press [w, q] to select “Start” andpress [OK].Recording starts.To stop recordingPress [g].Notey Only one piece of DV equipment (e.g., digital video camcorder)can be connected to the unit via the DV input terminal.y It is not possible to operate the unit from the connected DVequipment.y The DV input on this unit is for use with DV equipment only. (Itcannot be connected to a computer, etc.)y The DV equipment name may not be shown correctly.y Depending on the DV equipment, the images or audio may not beinput properly.y The date and time information on the tape of the DV equipmentwill not be recorded.y -R It may not be able to record after repeating about 30 times ofstep 2 or recording or editing.y -R -RW(V) After finalising, chapters for every 5 minutes will becreated.y +R After fi nalising, chapters for every 8 minutes will be created.y +RW After creating top menu, chapters for every 8 minutes will becreated.If the DV Automatic Recording function does not work properly,check the connections and DV equipment settings, and turn theunit off and back on.If that does not work, follow the instructions for manualrecording (➡ 58).Recording via AV2 inputBD-RE BD-R RAM -R -RW(V) +R +RWIt is possible to record to disc from equipment connected to the AV2input terminals.Recording mode is FR mode (➡ 30).Preparationy Press [DRIVE SELECT] to select the drive. Select “BD” for DVD.y When the output signal from the external equipment is NTSC,change “TV System” to “NTSC” in the Setup menu (➡ 92).1 While stoppedPress [FUNCTION MENU].2 Press [e, r] to select “Others” andpress [OK].3 Press [e, r] to select “Recording viaAV2 input” and press [OK].y It may take a while for the next screen to display whilepreparing to record.RETURNOKRecording via AV2 inputSet recording timeRecording will stop whentimer recording starts.Hour8 Min.00 Start CancelPlease set recording time.Maximum recording timeRecord in FR mode.7 hour 53 min.4 Press [w, q] to select “Hour” and“Min.” and press [e, r] to set therecording time.y You can also set the recording time with the numberedbuttons.5 Start play on the other equipment.6 When you want to start recordingPress [w, q] to select “Start” andpress [OK].To exit the screen without recordingPress [RETURN ].To stop recording partwayPress [g].To show the remaining timePress [STATUS ].Notey -R It may not be able to record after repeating about 30 times ofstep 3 or recording or editing.y -R -RW(V) After fi nalising, chapters for every 5 minutes will becreated.y +R After fi nalising, chapters for every 8 minutes will be created.y +RW After creating top menu, chapters for every 8 minutes will becreated.