39Setting MenusRQT8851NotesDVD-V Choose the language for audio, subtitles and disc menus.If a language which is not recorded is selected, or if languages arealready fixed on the disc, the language set as the default on the discwill be played instead.[Original] The original language of each disc will beselected.[Other ] This is the language code setting. Input a codenumber with the numbered buttons. (➔ 37,“Language code list”)[Automatic] If the language selected for “Audio Language”is not available, subtitles of that language willautomatically appear if available on the disc.Settings for RecordingPress [ENTER] to show the following setting.Recording Time in EP ModeSelect the maximum number of hours for recording in EP mode.[EP-Extended Play (6H)]:You can record for 6 hours on an unused 4.7 GB disc.[EP-Extended Play (8H)]:You can record for 8 hours on an unused 4.7 GB disc.VideoStill Mode (paused video)Select the type of picture shown when you pause play. (➔ 78,“Frame and field”)[Automatic][Field] Select if jittering occurs when “Automatic” is selected.[Frame] Select if you cannot see small text or fine patternsclearly when “Automatic” is selected.Black Level ControlSelect “Normal”, “Lighter” or “Darker” to adjust the black levelcontrol to the desired setting for picture enhancement.Press [ENTER] to show the following settings.Input LevelAdjusts the black level of the input signal.[Lighter] [Darker]Output Level (Composite/S Video)Adjusts the black level of the output signal from the VIDEO OUTand S VIDEO OUT terminal.[Lighter] [Darker]Output Level (Component)Adjusts the black level of the output signal from theCOMPONENT VIDEO OUT (Y/PB/PR) terminals.[Lighter] [Normal] [Darker]AudioDynamic Range CompressionDVD-V (Dolby Digital only)Change the dynamic range (➔ 78) for easier listening in lowvolume.[On] [Off]Multi-channel TV Sound (Analog)-R -R DL -RW(V) +R +R DL +RWSelect whether to record the main or secondary audio program(SAP) when recording to these discs. (You cannot select the audiotype on the unit when recording from an external device. Select iton the external device.)[Main] [Secondary Audio Program (SAP)]Digital Audio OutputChange the settings when you have connected equipment throughthe unit’s DIGITAL AUDIO OUT terminal (➔ 52).Press [ENTER] to show the following settings.PCM Down ConversionSelect how to output audio with a sampling frequency of 96 kHzor 88.2 kHz.Signals are converted to 48 kHz or 44.1 kHz despite the settingsif the signals have a sampling frequency of over 96 kHz or 88.2kHz, or the disc has copy protection.[On] Signals are converted to 48 kHz or 44.1 kHz. (Choosewhen the connected equipment cannot process signalswith sampling frequency of 96 kHz or 88.2 kHz.)[Off] Signals are output as 96 kHz or 88.2 kHz. (Choosewhen the connected equipment can process signals withsampling frequency of 96 kHz or 88.2 kHz.)Dolby Digital *Choose whether to output by “Bitstream”,which processes Dolby Digital signals on otherconnected equipment, or to convert the signals to“PCM (2ch)” on the unit before output.[Bitstream] When you have connected the unit to equipmentdisplaying Dolby Digital logo.[PCM] When you have connected the unit to equipmentthat doesn’t have Dolby Digital logo.DTS *Choose whether to output by “Bitstream”,which processes DTS signals on otherconnected equipment, or to convert the signalsto “PCM (2ch)” on the unit before output.[Bitstream] When you have connected the unit to equipmentdisplaying DTS logo.[PCM] When you have connected the unit to equipmentthat doesn’t have DTS logo.Select Audio Channel For DV InputYou can select the kind of audio when recording from the unit’s DVIN terminal (➔ 25).[Stereo 1] Records audio (L1, R1)[Stereo 2] Records added audio such as narration (L2, R2)subsequent to original recording.[Mix] Records both Stereo 1 and Stereo 2.* Incorrect settings can cause noise to be output which can beharmful to your ears and speakers, and audio will not be recordedproperly on media such as mini discs.Downloaded From Disc-Player.com Panasonic Manuals