54RQT8851Setting the Channels and ClockPreparation:Turn on the television and select the appropriate videoinput to suit the connections to this unit.These are the first settings you make upon buying theunit. You don’t need to make these settings again.••to turn the unit on.Language:e, r to select, then EnglishEspañolFrançaisPress ENTERPulse ENTERAppuyer sur ENTERSelect LanguageSeleccione el idiomaSélection de langueTV Aspect Ratio:e, r to select “4:3 TV” or“16:9 Widescreen TV”, thenAspect Ratio SelectionSelect TV type and press ENTER.(Please refer to Operation Instructionfor details)4:3 TV16:9 Widescreen TV16:94:3When connecting to a 4:3 standard aspect TV:Select “4:3 TV”.When connecting to a 16:9 widescreen TV:Select “16:9 Widescreen TV”.••Quick Start Function:e, r to select “On” or “Off”,thenQuick Start SettingThe unit can be turned on faster, in about1 second. Please note that Quick Startmode slightly increases powerconsumption when the unit is off.(See Operation Instructions for details)Turn Quick Start on ?OnOffAutomatic Clock and ChannelSettings:e, r to select “Yes” or “No”,thenWhen connecting the cable from the wall(cable TV or antenna) to the unit’s RF IN:Select “Yes”.The unit then displays the source selectionscreen (➔ 55).When not connecting the cable from the wall(cable TV or antenna) to the unit’s RF IN:Select “No”.The unit then displays “Set Clock Manually”screen (➔ 55, Manual Clock Setting).••Automatic Clock and Channel SettingsDoes this unit get its TV signal via RF IN?Example: Antenna, Cable TV or Cable Box connected to theunit’s RF IN.YesNoContinued on next page.Tips“Quick Start” function (➔ 38)If you set Quick Start to on, you can startrecording to DVD-RAM about 1 secondafter you press [^ DVD POWER] to turnthe unit on and then sequentially press[* REC].The following happens when you haveselected “On”.Power consumption in standby modeincreases because power is supplied tothe unit.To return to the previous screenPress [RETURN].•–Downloaded From Disc-Player.com Panasonic Manuals