66RQT8851When Other Panasonic ProductsRespond to this Remote ControlUse this function to synchronize the codes for theremote control and the main unit when there are otherPanasonic products close to your unit.With the unit stoppede, r to select “Setup”, then q.e, r to select “Remote ControlCode”, thene, r to select the code “Set Code1”, “SetCode2”, or “Set Code3”, then to set.While pressing and holding ,press and hold the numberedbutton , , orcorresponding to the code set instep 4 for more than 5 seconds toset.to complete.When the following indicator appears on the unit’s displayChange the code on the remote control to match thecode displayed for the main unit (➔ step 5).–TipsTo return to the previous screenPress [RETURN].To exit the screenPress [SETUP].To Reset this UnitTo reset the channel information and theclock settingsOn the main unitPress and hold both buttonsfor about 5 seconds.To reset the ratings level settingsYou can reset both parental rating (➔ 42) andDVD-Video rating (➔ 38).With the unit stoppedto open the disc tray.On the main unitREC Press and holdboth buttons forabout 5 seconds.To restore the unit if it freezesOn the main unitPress and hold for morethan 10 seconds.The unit is off.–orOn the main unitREC Press and hold formore than 1 secondwith a pointed object.If the Antenna Connector doesn’t MatchUse one of the following connections to suit the antenna lead to the unit’s RF IN terminal, and the 75 Ω coaxialcable to the antenna terminals on your TV or other equipment. Refer to the other equipment’s operating instructionsfor more information.Type This unit Other equipment (television etc.)A twin leadfrom the antenna(Flat) Twin lead300 Ω cable300−75 Ω transformerTo this unit’s RF INterminal75−300 Ω transformer75 Ω coaxialcableVHF or UHFTelevisionTroubleshooting GuideDownloaded From Disc-Player.com Panasonic Manuals