ENGLISH29RQT9185When connecting to an amplifier/receiver to enjoy multi-channel surround sound, use the following settings on this unit if they cannot be set onthe amplifier/receiver.The settings are not effective when outputting bitstream signals.PreparationSet “Speaker” to “Multi-Channel”. (> 28)§ Surround back channel is enabled only when the unit is connectedto an amplifier/receiver supporting HDMI 7.1 channel audio.[BD-V]: If the original audio is 5.1ch DTS-HD or DTS, the remappingfunction is activated to divide it to 7.1ch.Speaker presence and size (A)1 Press [3, 4, 2, 1] to select the speaker icon (A) and press [OK].2 Press [3, 4] to select the setting and press [OK].Icon examples:Surround speaker (LS)≥Large: Select whenthe speakersupportslow-frequency (under 100 Hz) reproduction.≥Small: Select when the speaker does not supportlow-frequency reproduction.In order to make an ideal listening environment, settings of speakersizes may be automatically adjusted.For example, if the subwoofer is set to “No”, the front speakers willautomatically be set to “Large”. (In this case, we recommendconnecting a speaker that can reproduce bass below 100 Hz.)Delay time (B)For optimum listening with 7.1/5.1-channel sound, all the speakers,except for the subwoofer, should be the same distance from theseating position.If you have to place the center, surround and surround backspeakers closer to the seating position, adjust the delay time tomake up for the difference.If either distance D or F is less than E, find the difference in therelevant table and change to the recommended setting.1 Press [3, 4, 2, 1] to select the delay time box (B) and press[OK].2 Press [3, 4] to select the setting and press [OK].Channel balance (C)This does not work when connected with the HDMI terminal and“HDMI Audio Output” (> 28) is set to “On”.1 Select “Test” and press [OK].A test signal is output.Front (L)_—)Center_—)Front (R)_—)Surround (RS): ;Surround (LS)(— Surround Back (LB)§ (— Surround Back (RB)§§Test signal is output only when the unit is connected using HDMIAV OUT terminal.2 While listening to the test signal, press [3, 4] to adjust thevolume of each speakerFront speakers: 0.0 to s6.0 dBCenter and surround speakers: 0.0 to s12.0 dB≥You cannot adjust the volume of surround back speakers.3 Press [OK].The test signal stops.≥No signal is output for the subwoofer. To adjust its volume, playsomething, then return to this screen to adjust to suit your taste.4 Press [OK].“General”Remote Control (> 33) ≥Set Code 1 ≥Set Code 2 ≥Set Code 3Easy SettingYou can execute basic settings (On-screen Language, TVAspect).≥Yes ≥NoDefault SettingsThis returns all values in the Setup menu and the on-screenmenu, except for “Remote Control”, “On-screen Language”,“IP Address / DNS Settings”, “Proxy Server Settings”,“DVD-Video Ratings” and “BD-Video Ratings” to the defaultsettings.≥Yes ≥NoDivX Registration (> 20)You need this registration code to purchase and play DivX Video-on-Demand (VOD) content.Firmware Update (> 9)≥Press [OK] to show the following settings.Automatic UpdateWhen this equipment remains connected to the Internet,it will check for the latest firmware version when it isturned on and you can update it if necessary.≥On ≥OffUpdate Now You can update the firmware manually.Changing the speaker setting to suit your speakersmsmsLCompleteTestLSRSWRSdBdB dBdBdBdBmsLB RB0.00.00.00.0 0.00.00.0 0.00.0CSubwooferFront (R)CenterFront (L)Complete(LS) Surround (RS) Surround backTest(RB)§(LB)LS LSNoLarge SmallD Center speaker F Surround/Surround backspeakersDifference SettingApprox. 34 cm 1.0 ms Difference SettingApprox. 170 cm 5.0 msApprox. 68 cm 2.0 msApprox. 102 cm 3.0 ms Approx. 340 cm 10.0 msApprox. 136 cm 4.0 ms Approx. 510 cm 15.0 msApprox. 170 cm 5.0 msE FDLLSRSWCRSCRSLSD EFLLBRRSSWCRBCRBRSLSLBD EFFLSApproximate room dimensionsCircle of constant primary listening distance: Actualspeakerposition: Idealspeakerposition: Primarylisteningdistance5.1ch speakerconnection7.1ch speaker connection29