21RQT9132You can enjoy teletext broadcasting, including news, weatherforecasts and subtitles, if this service is provided by thebroadcasters.When “ ” appears in digital channel information (> right)1 Press [TEXT ].2 Press [3, 4], the numbered buttons,or the colour buttons to select thepage.Follow the instruction on the screen to select the page.To show the sub page(only when there are sub pages)Press [2, 1].∫ Change the Teletext mode“Teletext” of the Setup menu can be changed to following modes.(> 89)≥FLOF (FASTEXT) modeFour differently coloured subjects are situated at the bottom ofthe screen. To access more information about one of thesesubjects, press the appropriately coloured button. This facilityenables fast access to information on the subjects shown.≥TOP mode (in case of TOP text broadcasting)TOP is a particular improvement of the standard teletext servicethat results in an easier search and effective guide.–Fast overview of the teletext information available–Easy to use step-by-step selection of the topical subject–Page status information at the bottom of the screen≥List modeFour differently coloured page numbers are situated at thebottom of the screen. Each of these numbers can be alteredand stored in this unit.To store frequently viewed page (List mode only)During the page is displayed1 Press the colour button of the colour to store.2 Press and hold [OK].To change stored pages (List mode only)1 Press the colour button of the colour to change.2 Enter the new page number with the numbered buttons.3 Press and hold [OK].To exit the teletext screenPress [TEXT ][Note]The teletext function depends on respective stations.While stoppedPress [STATUS ].1 Channel and Station Name2 Programme name and Broadcast time3 Current category4 Change the category5 The parental ratings level is displayed6 TV signal is weak (> below)7 Subtitle (> 20)8 Teletext (> left)9 Multiple audio/Multi VideoTo switch information of the current programme and the nextprogrammePress [2, 1].To show detailed information about the programmePress [STATUS ] again.To hide the information screenPress [STATUS ] once or twice.[Note]You can also select the other channel when the information screen isdisplayed by pressing [3, 4] and [OK].There are programmes that use Dolby Digital Plus, HE-AAC, DolbyDigital, or MPEG audio formats with the digital broadcasting. Youcan enjoy these audio format programmes in high quality byconnecting to an amplifier.To confirm the audio format of the programmeConfirm in the digital channel information. (> above)To set the audio format to outputSet the “Audio Mode for Digital Broadcast” in the Setup menu(> 89).To set the output of the audioSet either “Bitstream”/“Bitstream (DTS)” or “PCM” for “Dolby D/Dolby D +/Dolby TrueHD”, “DTS/DTS-HD”, “MPEG” or “HE-AAC” inthe “Digital Audio Output” (> 88).∫ If New service message appears(> 86, New Service Message)To show TeletextP100<<01 02 03 04 05 06 07 >>TELETEXTINFORMATIONCurrentpagenumberSub page numberColour barP100Broadcast101 200 400 888The number changes to white.Digital channel informationIf “Bad Signal” is displayed:≥Adjust the position and direction of the aerial.≥Check that the current digital broadcast channel is correctlybroadcasting.Audio format of the programme1 TEN HD All DVB Services10:30Change categoryCorontation street9:00 - 11:00 NowRating:PG Bad Signal 1 TEN HD All DVB Services10:30Change categoryCorontation street9:00 - 11:00 NowDolby DigitalWatching digital broadcasts