Panasonic DMR-BW500 Operating Instructions Manual

Also see for DMR-BW500: Operating instructions

Contents

Panasonic DMR-BW500 Operating Instructions Manual Manual pdf 36 page image

36RQT9132Advanced timer recordingEven when the unit is turned off, you can display the timer recordinglist by pressing [PROG/CHECK].Press [PROG/CHECK].Icons∫ To change a programmePress [3, 4] to select the programme and press [OK]. (> 34,step 3)∫ To delete a programmePress [3, 4] to select the programme and press [DELETE ¢].∫ Confirm the History List1 Press the “Green” button.2 Press [3, 4] to select the programme and press [OK].≥Reason why the timer recording failed or similar can beconfirmed.≥Press the “Green” button to return to the previous screen.∫ To exit the timer recording listPress [PROG/CHECK].[Note]≥Programmes that failed to record are deleted from the timerrecording list at 4 a.m. two days later.≥Only 1 programme can be set to timer record on the disc.≥Timer recording will not be performed if the clock is not set.≥If the “TV System” (> 90) in the Setup menu was modified toplayback a disc or a title while on timer recording standby, returnthe setting to original before the recording is started.≥Timer recordings are activated regardless of whether the unit isturned on/off.≥Timer recordings begin when the set time is reached even whenplaying. Depending on the state of the unit, playback may stopwhen recording begins.≥If the unit is turned on when timer recording begins, it remainsturned on after recording finishes. It does not turn off automatically.You can turn the unit off during timer recording.≥When you programme successive timer recordings to startimmediately one after the other, last 1 minute of earlier programmewill not be recorded unless it can perform 2 programmessimultaneous recording.First 1 minute of the following programme is not recorded either ifthe following programme set to be recorded is also BD.≥If the start of 2 timer recordings overlap with each other when 2programme simultaneous recording is not possible, theprogramme with the earlier start time will be recorded.Starting of the timer recording while executing other operation> 100Check, change or delete a programmeF Red :Timer recording standby is activated.Grey:Timer recording standby is not activated.[ This programme is currently recording.Part or all of the programme will not be recorded sincethe programme is overlapping.The disc was full so the programme failed to record.The programme was copy-protected so it was notrecorded.The programme did not complete recording becausethe disc is dirty or some other reason.Timer programmes set to Auto Renewal Recording(> 35).Timer programmes that will be relief recorded to theHDD.OK: Displayed if the recording can fit in theremaining space.> (Date): For recordings made daily or weekly, the displaywill show until when recordings can be made(up to a maximum of one month from thepresent time) based on the time remaining onthe disc.! : It may not be possible to record because:≥there is not enough space left.≥the number of possible titles has reached itsmaximum. (> 31)Date Service Name Drive/Mode SpaceNew Timer ProgrammeOKRETURNPagePage CHTimer OffTotal 3/32 DELETEHistory ListTimer Recording 1:58 SPDVD30:24 DRHDDRemainOKOKOKMON 12/1 1:59 - 2:55 France 2 HDD/DRMON 12/1 2:06 - 2:08 France 2 HDD/DRSUN 12/7 2:16 - 2:17 France 3 HDD/DRMON 12/01/08 1:30Programme NameProgramme NameProgramme NameNotes on timer recordingProgramme ProgrammeRecorded RecordedNot recorded