33RQT9132Operation during RecordingCheck the recordingprogrammePress [STATUS ].Display the recordingprogramme on the TVscreenTo display the programme being recorded, perform the following operation.≥If the input was switched: Press [INPUT SELECT].≥If the channel was switched: Press [W X CH].≥If the drive was switched: Press [DRIVE SELECT].To stop recording If the programme to be stopped is not displayed, please display it. (> above)Press [∫].≥From the start to the end of the recording is called one title.To pause recording If the programme to be paused is not displayed, please display it. (> above)Press [;].≥Press again to restart recording.You can also press [¥ REC] to restart.(Title is not split into separate titles.)≥If paused while recording in DR mode, the paused part may become a still picture for a moment duringplayback of that programme.Switch the input Press [INPUT SELECT].Switch to other channel Press [W X CH].Perform 2 programmessimultaneous recordingRecord other programme with steps 1–4 on page 23.≥One of the 2 programmes needs to be digital broadcasting recorded with DR mode.≥Channel switch / input switch while performing 2 programme simultaneous recording will switch betweenthe 2 recording programmes.Recording programmedisplayed on the TV screene.g., while 2 programmes simultaneous recording090 NINE HDHDDREC1002 ABC TV REC2Recording programme notdisplayed on the TV screen“REC1” and “REC2” will lightREC1REC2Advanced recording
