Getting startedVQT2X3712ConnectionWhen connected to an HDMI compatible unit, you can enjoy high quality, digital video and audio.≥Before connection, turn off all equipment and read the appropriate operating instructions.≥Other TV connections (> 14)Required setting:Set “HDMI Video Mode” and “HDMI Audio Output” to “On” (> 80).(The default setting is “On”.)≥ The HDMI connection supports VIERA Link “HDAVI Control” (> 64).Basic connectionsWhen the unit is not to be used for a long timeTo save power, unplug it from the household mains socket. This unit consumes a small amount of power, even when it isturned off[approx. 1.1 W (“Power Save in Standby” is activated)]About HDMI cable≥Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover).≥When outputting 1080p signal, please use HDMI Cables 5.0 meters or less.≥Recommended Panasonic HDMI cable part number:RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m), RP-CDHS50 (5.0 m), etc.≥ You cannot connect this unit to DVI devices that are incompatible with HDCP.Depending on the device, images may not display properly or at all when connecting with a DVI/HDMI switching cable. (Audio cannot be output.)≥ If you are connecting to a TV that is only compatible with 2 channel audio output, audio with 3 channels or more will be down mixed (> 105) andoutput as 2 channels, even if connecting with an HDMI cable. (Some discs cannot be down mixed.)≥ How to replace the fuseOpen the fuse cover with a screwdriver and replace the fuse, then attach the fuse cover.10BASE-T/100BASE-TXAC INCOMPONENTVIDEO OUTOUTAV1 INYRP BPR - AUDIO- L VIDEO S VIDEOCOAXIALOPTICALDIGITAL AUDIO OUT(PCM/BITSTREAM)RF INRF IN RF OUTRF OUTVHF/UHFRF INHDMI IN4123To the aerialTVAerial cableRF coaxial cable(supplied)This unit’s rear panelTo household mains socket(AC 220 to 240 V, 50 Hz)Cooling fanAC mainslead(supplied)HDMI cable(> below)Connect only after all otherconnections are complete.