Getting startedVQT2X3713≥Connect to terminals of the same colour.§ If the unit is connected to the TV with the supplied Audio/Video cable (> 14), the optional one is required.Following functions will be available when this unit isconnected to the network.≥DLNA function (> 66)≥Enjoying VIERA CAST (> 68)≥Enjoying BD-Live discs with Internet (> 31)≥Automatically acquiring the title of the CD (> 55)≥Updating the software (firmware) of this unit (> 84)≥ Refer to the operating instructions for the connected device.≥ Use category 5 or above straight LAN cables (STP) when connecting toperipheral devices.≥ Inserting any cable other than a LAN cable in the LAN terminal candamage the unit.≥ Please be aware that if you connect to a network without encryption, athird party may illegitimately intervene and eavesdrop on thetransmissions, and data such as personal information, confidentialinformation etc. may be leaked.Connect the Set Top Box or VCR∫ Connecting withAUDIO/VIDEO terminals∫ Connecting with AUDIOand S VIDEO terminalsConnect the unit directly to the TVIf you connect the unit through an AVselector or VCR to the TV, video signalwill be affected by copy protectionsystems and the picture may not beshown correctly.≥When connecting to a TV with abuilt-in VCRConnect to the input terminals on theTV side if there are both TV and VCRinput terminals.COMPONENTVIDEO OUTOUTAV1 INYRP BPR - AUDIO- L VIDEO S VIDEOCOMPONENTVIDEO OUTOUTAV1 INYRP BPR - AUDIO- L VIDEO S VIDEORF OUTAUDIO OUT VIDEO OUTR LAUDIO OUT S VIDEO OUTR LThis unit’s rear panelSet Top Box or VCRS Video cableAudio/Video cable(supplied)§This unit’s rear panelTVVCRThis unitDO NOTNetwork connection10BASE-T/100BASE-TXRF INRF IN RF OUTRF OUTBroadband router, etc.InternetLAN cableThis unit’s rear panel
