Panasonic DMR-BW880 Operating Instructions Manual

Also see for Diga DMR-BW880: Operating instructions Operating instructions Operating instructions

Contents

Panasonic DMR-BW880 Operating Instructions Manual Manual pdf 84 page image

Convenient functionsVQT2X3784Software (Firmware) UpdateBlu-ray Disc technology and broadcast services continue toadd new features. As they evolve, software (firmware)updates may be required to support the latest features.Panasonic strives to continually update software (firmware)as new technology is released. It’s very important you installthe latest updates to maintain proper operation of your unitusing one of the following methods.For the latest software (firmware) update information, pleaserefer to the Panasonic support site below.If your unit is connected to the Internet connection, softwareof this unit can be updated automatically from the Internet atthe specified time.(Default setting is 3 a.m. > 83, Software Update in Standby)≥Network connection and setting are required. (> 13, 19)≥It takes about 1 hour to update.∫ If a software (firmware) update isavailable, a notification is displayed.≥Update of the software (firmware) will start when theunit is turned to standby mode.≥ The download time depends on the network environment.≥ If the timer recording is scheduled within 1 hour at the start of thedownload, the download will not be executed.≥ If you do not want to perform the software (firmware) update, set the“Software Update in Standby” to “Off”. (> 83)If your unit is not connected to the Internet connection, youcan download the latest firmware version from thePanasonic support site. After you copy the latest firmware toa CD-R disc, play the disc in the unit and it will automaticallyupdate the firmware.∫ The unit’s display during the update≥When “FINISH” is displayed, update of the software(firmware) has completed.http://panasonic.jp/support/global/cs/Internet connectionUsing a CD-R discNew software version has been found.The software will be updated automaticallyafter this unit is switched to standby.Do not disconnect the AC mains lead.You cannot operate the unit until the update iscomplete. Removing the AC mains lead while theupdate is in progress may damage the unit. Don’tremove the AC mains lead during the update.