RecordingVQT2X3730Timer recordingPress [PROG/CHECK].To exit the timer recording listPress [PROG/CHECK].≥ Failed programmes are deleted from the timer recording list at 4 a.m.two days later.Press [STATUS ].Additional information is available for these programmes.Select the programme, then press the “Red”button.≥The timer icon “F” (> left) will change from red to grey.≥Press the “Red” button again to activate timer recordingstandby. (The timer icon “F” will change to red.)1 Select the programme, then press [OK].2 Go to step 3 on page 28.Select the programme, then press [DEL].To confirm and edit a timerprogrammeScreen iconsF Red: Timer recording standby is activated.Grey: Timer recording standby is deactivated.[ Currently recording programmePart or all of the programme will not be recordedsince the programme is overlapping.The disc was full.Copy-protected programmeIt was not recorded.The programme did not complete recordingbecause of some reason.Auto Renewal Recording is set (> 28).OK Displayed if the recording can fit in the remainingspace>(Date)Daily or weekly timer programme is set. (up to amaximum of one month from the present time)! It may not be possible to record because:– there is not enough space left.– the number of possible titles has reached itsmaximum. (> 101)– programmes are deactivated.Channel Name Schedule Drive/Mode SpaceOKRETURNPage UpPage DownTurnTimer OffTotal 3/64Timer Recording 30:30 DRHDD 2010/01/01 FRI 23:05Delete InfoNew Timer Programme01/08 FRI01/08 FRIFRI01/08 FRIHDDDRHDDDRHDDDRHDDDROKOK-->01/31IconsTo show a programme informationTo deactivate a timer programmeTo change a timer programmeTo delete a timer programme
