Panasonic DMR-E100H Operating Instructions Manual

Contents

43RQT6986EditingEraseErase CancelErase this program.RETURNENTERSELECTPropertiesNo.DateCH16/20/ 2001 TUE4Time 8:21 PMRec time 0:01ENTERMDL002Bit RateRec capacityFile name295Kbps2MBMDL002RETURNENTER_Enter Title112345678901002 3 4 5A B C aD E F dG H IN OgJ K L jM m6 7 8 9 0b c i je f / l %h i fl $¢&k l O N @n ] _o [SPACESETERASESELECT0 100 P Q R S pT U V tW X Y Z wq r s ( )u v { } -x y z` ^|!?\. , " ' : ;– –RETURNπ;ProtectionYes NoSet up Program Protection.RETURNENTERSELECTRETURN0 - - 9No.SD VIDEO(MPEG4)002 12/31No. CH DATE TITLE EDIT33START5:00 PM001 11:00 AM12/24SD CardENTERDinosaurAuto action42 11111SELECT[Note]≥The cards formatted on this unit may not beusable on other equipment.≥Make absolutely sure not to pull the AC powersupply cord out until a message indicatingcompletion appears. This may result in loss ofcard use.∫ Erase[HDD] [RAM] [SD]∫ Protection[HDD] [RAM] [SD]∫ Properties[HDD] [RAM] [SD] [CARD]∫ Enter Title[HDD] [RAM] [SD]Once a a program hasbeen erased, it isirretrievable. Checkcarefully beforeproceeding.Program information(e.g., time and date) isshown.Entering text ➜ page 46If set, this will protectthe program fromaccidental erasure.[Note]All content may be erased including files notsupported by this unit.Press [2, 1] toselect “Erase ” andpress [ENTER].The program is erased.Press [2, 1] to setprotection andpress [ENTER].The lock symbolappears when theprogram is write-protected.Press [2, 1] toselect “Start” andpress [ENTER].Formatting starts.Press [2, 1]to select “Yes”and press[ENTER].Press[ENTER]to completethe procedure.Press[ENTER]to completethe procedure.[Note]≥ Make absolutely sure not to pull the AC powersupply cord out until a message indicatingcompletion appears. This may result in loss ofcard use.≥ All content may be erased including files notsupported by this unit.To stop erasingPress and hold [RETURN] for 3 seconds. (Erases everything up to the point stopped.)Press [2, 1] toselect “Start ” andpress [ENTER].All programs are erased.Press [2, 1] toselect “Yes ” andpress [ENTER].