Panasonic DMR-E100H Operating Instructions Manual

Contents

8RQT6986Setting upSTEP 4 VCR Plusi guide channel settingsSet these guide channels so you can use VCR Plusi codes fortimer recording. Before starting the settings, prepare a chart show-ing the channels, station names, and guide channels.e.g.,1 Press [SETUP] to show the menus.2 Press [3, 4] to select “Channel” andpress [1].3 Press [3, 4] to select “VCR PlusrCH Setting” and press [ENTER].e.g., when the current antenna system is CATV.4 Press [3, 4] to select the guidechannel you want to set and press[1].When selecting the guide channel, press and hold [3, 4] toscroll the screen up and down.5 Press [3, 4] to select the channelcorresponding to the guide channeland press [2].To delete a number, press [CANCEL].Repeat steps 4 and 5 as necessary.6 Press [ENTER].The “Channel” screen reappears.To return to the previous screenPress [RETURN].To exit the SETUP screenPress [SETUP].StationnameGuidechannelChannelnumberChannel setting(in step 5)CBS 04 04 UnnecessaryHBO 33 15 Enter channel 15 nextto Guide Channel 33.Nickelodeon 38 20 Enter channel 20 nextto Guide Channel 38.DVD TVINPUT SELECTVCR Plus+ OPEN/CLOSE TV/VIDEOCHVOLUMESKIPDIRECT NAVIGATOR PLAY LISTTOP MENUENTERMENUFUNCTIONS RETURNSTOP PAUSE PLAY/x1.3SLOW/SEARCHCANCEL1 2 3DVD TV4 5 67 8 90 100FRAME CM SKIP TIME SLIPERASE RECPROG/CHECK ADD/DLTDUBBING REC MODESTATUS MARKERAUDIO SETUPDISPLAY POSITIONMEMORYPOWER3, 4, 2, 1ENTERCANCELRETURNSETUPHDD DVDLook up the guide channelsfor the stations in magazines.Write down all the stations youcan receive.TAB SELECTAntenna SystemAuto Channel SettingChannel CaptionPreset Channel CaptionManual Channel CaptionVCR Plusi CH SettingCATVChannelSETUPRETURNSet UpDiscVideoAudioDisplayTV ScreenTABSELECTAntenna SystemAuto Channel SettingChannel CaptionPreset Channel CaptionManual Channel CaptionVCR Plusi CH SettingCATVRETURNSet UpDiscVideoAudioDisplayTV Screen ENTERChannelSETUPVCR Plusi and PlusCode are registered trademarks of Gem-star Development Corporation. The VCR Plusi system is manu-factured under license from Gemstar Development Corporation.Pats. 5,307,173; 5,335,079; 4,908,713; 4,751,578; and4,706,121SETUPSet UpDiscVideoAudioDisplayTV Screen ENTERVCR PlusiCH SettingGuide Channel CATV Channel------1251------RETURN23SELECTChannelENTERVCR PlusiCH SettingGuide Channel CATV Channel---456------RETURN78------SELECTSETUPChannelSet UpDiscVideoAudioDisplayTV ScreenENTERVCR PlusiCH SettingGuide Channel CATV Channel---456------RETURN7812---SELECTSETUPChannelSet UpDiscVideoAudioDisplayTV Screen