Panasonic DMR-E100H Operating Instructions Manual

Contents

61RQT6986Advanced operationOther antenna connectionsUse one of the following connections to suit the antenna lead.∫ A single twin lead∫ A twin lead and a coaxial cable∫ Two twin leads≥If your television has both lead and coaxial VHF terminals, use thelead connection to minimize signal loss.Use one of the following connections to suit the antenna terminalson your television. Refer to the television’s operating instructions.∫ A twin lead and coaxial plug terminal∫ A twin lead terminal∫ Two twin lead terminals∫ Multiple antenna terminals≥Connect to one of the terminals, then change the television’ssetting as necessary.Other antenna connection to the unit300–75 ≠ transformer(not included)from the antenna(Flat)Twin lead300 ≠ cableTo this unit’sRF IN terminalfrom the antenna(Flat)Twin lead300 ≠ cableTo this unit’sRF IN terminal(Round)75 ≠ coaxial cableVHF/UHF band mixer(not included)from the antennaTo this unit’sRF IN terminal300–75 ≠ transformer(not included)(Flat)Twin lead300 ≠ cableVHF/UHF band mixer(not included)Other antenna connection from the unitto the televisionVHF/UHF band separator(not included)Television75 ≠ coaxial cableVHFUHF75 ≠ coaxial cable75–300 ≠ transformer(not included)TelevisionVHF orUHF75 ≠ coaxial cableVHF/UHF band separator(not included)TelevisionVHFUHFANT 2ANT 1Split outTelevision75 ≠ coaxial cable