Panasonic DMR E50 Operating Instructions Manual

Also see for Diga DMR-E50: Operating instructions Operating instructions Operating instructions

Contents

17Auto Setup (with Q Link Functions) (continued)To Set Up this DVD Recorder with an existing Q Link TV1 Switch the TV on.2 Select the AV input on your TV.3 Switch [DVD, TV] (15) to “DVD”.4 Press [Í] (1) to switch the DVD Recorder on. Downloading of the setup data starts automatically.5 To set up the Owner ID, repeat the steps 3-8 on the previous page.Auto Setup (without Q Link Functions)Auto Setup automatically tunes all available stations and sets the DVD Recorder’s clock to the current date and time.1 Switch the TV on.2 Select the AV input on your TV.3 Switch [DVD, TV] (15) to “DVD”.4 Press [Í] (1) to switch the DVD Recorder on.≥Auto Setup starts. This takes about 5 minutes.≥(If connected to your TV using the RF lead only)Select an unused channel pre-set on your TV and tune it to the RF output channel number shown on the DVD Recorder display (or untilyou can clearly see the Auto Setup screen). Store the new video playback channel (refer to the instructions for your TV).5 To set up the Owner ID, repeat the steps 3-8 on the previous page.When no stations have been set, confirm all connections and restart Auto SetupSee page 66 and Hint below.To restart Auto Setup≥You can restart Auto Setup, without using remote controller, by pressing some buttons on the front of the unit. Hold down [W, CH] (18) and[X, CH] (18) on the main unit simultaneously for about 5 seconds.RETURNDownloadDownload in progress, please wait.RETURN : to abortPos 4RETURNOwner IDRETURN : leaveNameHouse No.PostcodePIN number ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢RETURNAuto-SetupAuto-Setup in progress, please wait.RETURN : to abortCh 4RETURNOwner IDRETURN : leaveNameHouse No.PostcodePIN number ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢