Panasonic DMR E50 Operating Instructions Manual

Also see for Diga DMR-E50: Operating instructions Operating instructions Operating instructions

Contents

35Timer recording (continued)To check programmes[RAM] [DVD-R]Press [PROG/CHECK] (13).The Timer Programme List screen appears.Icon explanations (A)¥ This programme is currently recording.W The programme is overlap with another programme.F The disc was full or the maximum number of programmes orscenes was reached so the programme failed to record.The television programme was copy-guarded so theprogramme failed to record.X The programme failed to record for some other reason.Disc spaceOK: Displayed if the recording can fit in the remainingspace on the disc. However, when the programmebecomes longer than scheduled during therecording by setting “PDC” to “ON”, theprogramme may not be recorded until its end.# (Date): For recordings made daily or weekly, the displaywill show until when recordings can be madebased on the time remaining on the disc.!: Displayed if the disc is not inserted in the unit or iswrite-protected (pages 38, 73) or there is notenough memory capacity left on the disc.ªTo change the programme(page 34)ªTo exit from the Timer Programme List screenPress [PROG/CHECK] (13) or [RETURN] (23). (The television isshown.)For your reference≥Programmes that failed to record are deleted from the list at 4a.m. the day after tomorrow.Starting and canceling programmes[RAM] [DVD-R]ªTo put the unit on recording standbyPress [ , TIMER] (12).The unit turns off and “ ” lights on the unit’s display.Note≥The unit cannot go to timer recording standby if the disc isprotected (pages 38, 73) or full (“ ” flashes). Check the disccarefully.ªTo release the unit from recording standbyIf you want to record something else before the programme starttime, for example:Press [ , TIMER] (12).The unit turns on and “ ” goes out.≥Be sure to press [ , TIMER] (12) before the programme starttime to put the unit on recording standby. The programme onlyworks if “ ” is on.ªTo stop recording while a programme is workingPress [ , TIMER] (12).To clear a timer recording programme[RAM] [DVD-R]Press [CANCEL] (5) or [ERASE] (30) while theprogramme’s Timer Programme Correction screen isbeing shown.(Alternatively, use [3, 4] (10) to select the programmein the Timer Programme List screen and press[CANCEL] (5) or [ERASE] (30).)≥You can not delete programmes that are currently recording.RETURNSELECTSP OK1:221:19BBC 1 16/ 7 TUE01Mode DiscspaceStopStartNo. Name Date1:58 SPTIMERRECORDING Remain1:19:00 16.7 TUEENTERCANCELOFFPDCNew Timer ProgrammeWFX02030405BBC 1BBC 1BBC 1BBC 116/ 7 TUE24/ 7 WED24/ 7 WED24/ 7 WED1:208:009:0010:002:209:0010:0011:00SPSPSPSPOFFOFFOFFOFFOKOKOKOKA