Panasonic DMR-E95H Operating Instructions Manual

Also see for Diga DMR-E95H: Operating instructions Operating instructions

Contents

13RQT7467Getting started≥When connecting to a television with RF socket only(➡page 9)In some cases, interference (lines or patterning) or a very poorpicture may appear on the TV screen when this unit is connected.Follow the steps below to change the video playback channel (RFoutput channel) to remove the interference.1 Press [FUNCTIONS] for more than 5seconds.2 Press [W X CH] to select a channelnumber, which differs by 2 or 3 fromthe present channel number.e.g. If the original channel number was 28, enter 31.The test pattern screen disappears.3 Re-tune your TV until you receive thetest pattern screen.If you can’t see the test pattern screen clearly, repeat step 1and 2 to select RF output channel again4 Press [ENTER] to finish this setting.This unit doesn’t recognise VIDEO Plus+ numbers for Satellitestations or Cable TV stations.The following operation also allows you to use VIDEO Plus+numbers to make timer recordings for satellite and cable TVstations. As the settings indicated below are dummy timerrecordings, delete them in step 6.PreparationTurn on the Satellite receiver(s) or Cable TV box.Select a correct station.1 Press [VIDEO Plus+].2 Press the numbered buttons to entera VIDEO Plus+ number for a satellitestation (e.g. Sky One) or Cable TVstation.Press [2] to move back to correct a digit.3 Press [ENTER].“-- ---” will appear under “Name”.4 Press [3, 4] to select the channel orAV input that is to be used forrecording from the satellite station orCable TV station.5 Press [ENTER].The channel or AV input corresponding to the VIDEO Plus+number is memorised.Repeat steps 1s5 above until you have set dummy timerrecordings for each of the satellite stations or Cable TVstations that you will make VIDEO Plus+ recordings from.6 Press [3] to select each programmethat you have just set and press[¢ CANCEL] to delete it from thetimer recording list.To exit the screenPress [RETURN].Removing InterferenceTV screenPicture with interferenceRF OUTPUT CHANNELDVDCH : 28SELECTENTER RETURNRF output channel number appears.Test pattern screen appears.Unit’s displayTV screenRF OUTPUT CHANNELDVDCH : 31SELECTENTER RETURNClear pictureVIDEO Plus+ numbers for Satellite/Cable TV stationsVIDEO Plus+ 1:58 SPDVD30:24 SPRemain HDD 12:53:00 15. 7. TUEEnter VIDEO Plus+ Number by using 0-9 keys.TIMERRECORDING 12:54:00 15. 7. TUEProgramme NameModeStopStartName Date PDC HDDDVD20:0019:0015/ 7 TUE SP OFF HDD1:58 SPDVD30:24 SPRemain HDD1 BBCSP OK20:0019:0015/ 7 TUE01Mode DiscspaceStopStartNo. Name DateTIMERRECORDING 12:55:00 15. 7. TUENew Timer ProgrammeOFFPDC HDDDVD1:58 SPDVD30:24 SPRemain HDDAV2