Panasonic DMR-E95H Operating Instructions Manual

Also see for Diga DMR-E95H: Operating instructions Operating instructions

Contents

52RQT7467Convenient functionsChanging the unit’s settingsRefer to the control reference on page 47.You can restart auto channel setting if Preset Download or Auto-Setup (➡ page 11, 12) fails for some reason.After performing steps 1–3 (➡ page 51)∫ Auto-Setup Restart4 Press [3, 4] to select “Auto-SetupRestart” and press [ENTER].5 Press [2, 1] to select “Yes” andpress [ENTER].Auto-Setup starts.∫ Download from TV4 Press [3, 4] to select “Downloadfrom TV” and press [ENTER].5 Press [2, 1] to select “Yes” andpress [ENTER].Downloading from the television starts.To exit the screenPress [RETURN] several times.To return to the previous screenPress [RETURN].Change the settings to match the equipment you are connectingwith, or to match the title when there are both PAL and NTSC titleson the HDD.1 While stoppedPress [FUNCTIONS].2 Press [3, 4, 2, 1] to select “SETUP”and press [ENTER].3 Press [3, 4] to select “Connection”and press [1].4 Press [3, 4] to select “TV System”and press [ENTER].5 Press [3, 4] to select the TV systemand press [ENTER].≥PAL (factory preset)–Select when connecting to a PAL or Multi-systemtelevision. Titles recorded using NTSC are played as PAL60.–Select to record television programmes and PAL input fromother equipment.–[HDD] Select when playing a PAL input title recorded on theHDD.≥NTSC–Select when connecting to a NTSC television. Televisionprogrammes cannot be recorded properly.–Select to record NTSC input from other equipment.–[HDD] Select when playing a NTSC input title recorded onthe HDD.6 Press [2, 1] to select “Yes” andpress [ENTER].To exit the screenPress [RETURN] several times.To return to the previous screenPress [RETURN].∫ To change the setting all at once (PAL!#NTSC)While stopped, keep pressing [∫] and [< OPEN/CLOSE] on themain unit for 5 or more seconds.Auto-Setup Restart, Download from TV TV SystemSETUPOthersDiscPictureSoundDisplayTuningTV SystemPALNTSCConnectionSELECTENTERRETURN