Panasonic DMR-E95H Operating Instructions Manual

Also see for Diga DMR-E95H: Operating instructions Operating instructions

Contents

41RQT7467Transfer (Dubbing)Recording from a video cassette recordere.g., Connecting other video equipment to the AV3 or DV inputterminals≥Turn off the unit and other video equipment before connecting.If the audio output of the other equipment is monaural, connect to L/MONO.§ The S-VIDEO terminal achieves a more vivid picture than theVIDEO terminal.[HDD] [RAM] [DVD-R]Preparation≥Connect a video cassette recorder to this unit’s input terminals.≥Press [HDD] or [DVD] to select the recording drive.≥When recording bilingual programmes[HDD] [RAM]When both M 1 and M 2 is selected on the connected equipment,you can select the audio type in playback.[DVD-R]Select either M 1 or M 2 on the connected equipment. (You cannotselect the audio type in playback.)≥When the output signal from the external equipment is NTSC,change the “TV System” to “NTSC” in the SETUP menu (➡page 52).1 While stoppedPress [INPUT SELECT] to select theinput channel for the equipment youhave connected.e.g., If you have connected to AV3 input terminals, select “AV3”.2 Press [REC MODE] to select therecording mode.3 Start play on the other equipment.4 Press [¥ REC].Recording starts.To skip unwanted partsPress [;] to pause recording. (Press again to restart recording.)To stop recordingPress [∫].To record programmes to fill up the remaining space on thedisc➡ page 20, Flexible Recording[HDD] [RAM]When the “DV AUTO REC” function is used, programmes arerecorded as a title while at the same time chapters are created ateach break in the images and the play list is created automatically.Preparation1 Turn off the main unit and DV equipment, then connect theequipment with the unit’s DV input terminal (➡ left).2 Turn on the main unit and DV equipment.3 Pause play of the DV equipment at the point you want recordingto start.4 Press [HDD] or [DVD] to select the recording drive.≥Select the type of audio recording from “Audio Mode for DV Input”in the SETUP menu (➡ page 49).≥When the output signal from the external equipment is NTSC,change the “TV System” to “NTSC” in the SETUP menu (➡page 52).1 While stoppedPress [FUNCTIONS].2 Press [3, 4, 2, 1] to select “DVAUTO REC” and press [ENTER].3 Press [REC MODE] to select therecording mode.4 Press [2, 1] to select “Rec” andpress [ENTER].Recording starts.When recording finishesThe confirmation screen appears. Press [ENTER] to finish DVautomatic recording.To stop recordingPress [∫].[Note]≥Only one piece of DV equipment (e.g., digital video camcorder) canbe connected to the unit via the DV input terminal.≥It is not possible to operate the unit from the connected DVequipment.≥The DV input on this unit is for use with DV equipment only. (Itcannot be connected to a computer, etc.)≥The DV equipment name may not be shown correctly.≥Depending on the DV equipment, the images or audio may not beinput properly.≥The date and time information on the tape of the DV equipment willnot be recorded.≥You cannot record and play simultaneously.Manual recordingVOLUMECHDIRECT TV RECDVDTVAV1 2 34 5 67 809MANUAL SKIPCHCANCEL INPUT SELECTSKIPSTOP PAUSE PLAY/x1.3SLOW/SEARCHFUNCTIONSENTERDIRECT NAVIGATORTOP MENURETURNSUB MENUTIMERPROG/CHECKREC MODEERASE RECTIME SLIPSTATUSDISPLAYFHDD DVD SD/PC3,4,2,1ENTERFUNCTIONSREC MODEHDD, DVD¥ RECINPUT SELECT∫ ;VIDEO Plus+OPEN/CLOSEREC/ x1.3TIME SLIPCHTIME SLIPDRIVE SELECTSD PCDVDHDDSD CARD PC CARD EJECTHDD DVDAV3 S-VIDEO IN VIDEO IN AUDIO IN DV INRL/MONOL/MONO - AUDIO IN - RVIDEO IN DV INS-VIDEO INAudio/VideocableS-Video cable§Other videoequipmentYellow White RedThis unitDV cable(IEEE 1394, 4-pin)Almost all videos and DVD software on sale have beentreated to prevent illegal copying. Any software that hasbeen so treated cannot be recorded using this unit.DV automatic recording (DV AUTO REC)If the DV automatic recording function does not work properly,check the connections and DV equipment settings, and turn theunit off and back on.If that does not work, follow the instructions for manualrecording (➡ left).