13RQT84151 Standby/on switch (Í/I) (➡ 18)Press to switch the unit from on to standby mode or vice versa. Instandby mode, the unit is still consuming a small amount of power.2 Disc tray (➡ 24, 34)3 Connection for digital video (DV) camcorder (➡ 58)4 SD card slot (➡ below)5 Display (➡ below)6 Connection for camcorder etc. (➡ 58)7 Linked timer recordings with external equipment (➡ 33)8 Channel select (➡ 24)9 Open/close disc tray (➡ 24, 34): Select drive (➡ 24, 34, 40)Drive changes each time you press [DRIVE SELECT].; Stop (➡ 24, 35)< Start play (➡ 34)= Start recording (➡ 24)/Specify a time to stop recording (➡ 26)> Remote control signal sensorRear panel terminals (➡ 14, 15)When the card indicator (“SD”) on the unit’s display is flashing, the card is being read from or written to. Do not turn off the unit or remove the card.Such action may result in malfunction or loss of the card’s contents.≥Inserting foreign objects can cause a malfunction.≥You can use SD Memory Cards with capacities from 8 MB to 2 GB (➡ 7).Automatic drive select function≥If you insert an SD card while the unit is stopped, the “SD Card” screen is displayed. Select an item and press [ENTER] to switch to the SD drive( ➡ 40, 56).If you remove an SD card, the HDD drive is automatically selected.3 Timer recording indicator4 Lights when the SD card is inserted in the card slot.5 Lights when a disc that is supported by this unit is inserted in thetray.6 Lights when the HDD, DVD or SD drive is selected7 Main display section8 Recording modeMain unitOPEN/CLOSE DRIVESELECTk 1 . 31 . 3RECEXT LINK CHS VIDEO IN VIDEO IN L/MONO -AUDIO IN-AV3 RDV IN1 2 4 567 8 9 : ; < = >3Opening the front panelPress down on thepart with your fingerInserting, Removing the SD cardOpening the cover Inserting the card(Do not forget to close the cover. ➡ right)Removing the card Closing the coverThe unit’s displayPress the protrudingpart to open thecover.ADAPTERIf you are using aminiSD TM card, insert itinto the miniSD TM cardadaptor that comeswith the card.Insert and remove thisadaptor from the unit.Press on the centre of thecard until it clicks intoplace.Insert the card label up withthe cut-off corner on the right.12Press on the centre ofthe card.Pull it straight out.Press down.PLAYPLAYPLAYRECREC REC1 24536 7 81 Linked timer recordings with external equipment indicatorRecording Playback Recording/Playback2Control reference guide