Panasonic DMR-EH56 Operating Instructions Manual

Also see for Diga DMR-EH55: Owner's manual Operating instructions Setup guide Operating instructions

Contents

73RQT8415On the unit’s displayThe following messages or service numbers appear on the unit’s display when something unusual is detected during startup and use.§The message are alternately displayed.DVD (“∑” stands for a number.)≥The remote control and main unit are using different codes. Change the code on the remote control.Press and hold [ENTER] and the indicated number button at the same time formore than 2 seconds.23GUIDE ≥GUIDE Plus+ data is being downloaded. 20HARD ERR§ ≥If there is no change after turning the unit on and off, consult the dealer where the unit waspurchased.—NoERAS ≥You cannot delete items on this disc.The disc may be damaged. Use a new disc.—NoREAD ≥The disc is dirty or badly scratched. The unit cannot record, play, or edit.≥This message may appear when the DVD-RAM lens cleaner has finished cleaning.Press [< OPEN/CLOSE] on the main unit to eject the disc.1010NoWRIT ≥You cannot write to this disc.The disc may be damaged. Use a new disc.—PLEASE WAIT§ ≥There was a power failure or the AC plug was disconnected while the unit was on. The unit is carryingout its recovery process. This process restores the unit to normal operation. The unit is not broken.Wait until the message disappears.—PROG FULL§ ≥There are already 32 timer programmes. Delete unnecessary timer programmes. 31SLEEP ≥In order to extend HDD life, the HDD is in SLEEP mode. 9SP 35:50LP 151h“SP”,”LP” and the numbersare examples.≥Available space on the HDD or disc.The example “ SP 35:50” is displayed when less than 100 hours are available and the example “LP151h” is displayed when over 100 hours are available.“SP” and “LP” are recording modes, “35:50” means “35 hours 50 minutes” and “151h” means “151hours”.—UNFORMAT§ ≥You inserted an unformatted DVD-RAM, DVD-RW, +RW, an unused +R, +R DL or DVD-RW (DVD-Video format) that has been recorded on other equipment.Format the disc to use it.However all the recorded contents on the disc are deleted.61UNSUPPORT§ ≥You have inserted a disc the unit cannot play or record on. 4–6U59 ≥The unit is hot.The unit switches to standby for safety reasons. Wait for about 30 minutes until the messagedisappears.Select a position with good ventilation when installing the unit. Do not block the cooling fan on therear of the unit.—U61 ≥(When a disc is not inserted) Displays when a malfunction has occurred during recording, playback orcopy. This is displayed when the unit is in the recovery process to return to normal operation; it is notbroken. Once the display clears you can use the unit again.—U88 ≥(When a disc is inserted) Displays when there was something unusual detected with the disc whilerecording, playback or copy. This is displayed when the unit is in the recovery process to return tonormal operation; it is not broken. Once the display clears you can use the unit again.76U99 ≥The unit fails to operate properly. Press [Í/I] on the main unit to switch the unit to standby. Now press[Í/I] on the main unit again to turn the unit on.—H or F ≥There is something unusual. (The service number displayed after H and F depends on the unit’scondition.)≥Check the unit using the troubleshooting guide. If the service number does not disappear, do thefollowing.1. Disconnect the plug from the household mains socket, wait a few seconds, then reconnect it.2. Press [Í/I] to turn the power on. (The unit may be fixed.)If the service number does not disappear despite after doing the above, request service from thedealer. Inform the dealer of the service number when requesting service.—76–80X HOLD ≥The Child Lock function is activated.Press and hold [ENTER] and [RETURN] simultaneously until “X HOLD” disappears.64Messages