69RQT84151 While stoppedPress [FUNCTIONS].2 Press [3, 4] to select “To Others”and press [ENTER].3 Press [3, 4] to select “Setup” andpress [ENTER].4 Press [3, 4] to select “Tuning” andpress [1].You can add or delete channels, or change programme positions.5 Press [3, 4] to select “Manual” andpress [ENTER].If you select “Yes” and press [ENTER], the following screenappears.To delete a programme positionPress [3, 4, 2, 1] to select a programme position and press the“Red” button.To add a blank programme positionPress [3, 4, 2, 1] to select a programme position and press the“Green” button.To move a TV station to another programme position1 Press [3, 4, 2, 1] to select a programme position and pressthe “Yellow” button.2 Press [3, 4, 2, 1] to select the new programme position towhich you want to assign the TV station and press [ENTER].[Note]≥When the unit connected to a Q Link compatible TV with a fullywired 21-pin Scart cable sets itself automatically (➡ 18), onlydeletion of the programme position can be performed.≥If you delete programme position of Host Channel, the GUIDEPlus+ data is also deleted.∫ To change the tuning settings for individualprogramme position6 Press [3, 4, 2, 1]to select aprogramme positionand press [ENTER].Press [3, 4] to select an item and press [1].You can make the following two settings by selecting the externalinput channel (AV1, AV2, AV3, AV4) in step 5.≥Video System (Auto/PAL/SECAM)In order to record properly, make the appropriate settings to matchthe connected equipment.≥Title Page (Auto/Off)§1 It is not displayed in Germany. Audio reception type is fixed at“BG”.§2 Not provided for Germany.TuningManualSetupDiscPictureSoundDisplayConnectionTuningManualAuto-Setup RestartDownload from TVOthers ENTER RETURNTABSELECTManual TuningNoYesIf you delete programme positionof Host channel, GUIDE Plus+ datais also deleted. Continue?Manual TuningPos Name Ch Pos Name ChDeleteAddMove1 ARD 42 ZDF 23 N3 54 HR3 85 BR3 1067891011121314151617181920ENTER RETURNSELECTPos To change the programme position in whichthe TV stations are assignedPress [3, 4] or numbered buttons to select thenumber of the desired programme position andpress [ENTER].Name To enter or change the name of a TV stationPress [3, 4, 2, 1] to enter station name andpress [ENTER].If the station name needs a blank space, selectthe blank between “Z” and “¢”.Channel To enter newly available TV stations or changethe channel number of an already tuned TVstationPress [3, 4] or the numbered buttons to enterthe channel number of the desired TV station.Wait a few moments until the desired TV stationhas been tuned.After the desired TV station is tuned, press[ENTER].Fine Tuning To obtain the best tuning conditionPress [3, 4] to adjust the best tuning conditionand press [ENTER].≥Press [1] to return to “Auto”.VideoSystemTo select the video system typePress [3, 4] to select “PAL” or “SECAM” if thepicture lacks colour, and press [ENTER].Auto: This unit automatically distinguishesPAL and SECAM signals.PAL: For receiving PAL signals.SECAM: For receiving SECAM signals.AudioMode§1To select the audio reception typeIf sound quality is poor, press [3, 4] to select“BG” or “L” and press [ENTER].BG: PAL B.G.H/SECAM B.GL: SECAM L, L’Mono To select the type of sound to be recordedPress [3, 4] to select “On” if the stereo sound isdistorted due to inferior reception conditions, or ifyou want to record the normal (mono) soundduring a stereo, bilingual or NICAM§2 broadcast,and press [ENTER].Title Page To enter the Teletext title page for a channelEntering title page number allows the unit toautomatically record programme and stationnames.Press [3, 4] or numbered buttons to enter thenumber and press [ENTER].≥To find the correct title page for the station, referto its Teletext TV guide.PosNameChannelFine TuningVideo System14AutoRETURN : leaveManualTuning ARDAutoAudio Mode BGMono OffTitle Page 301RETURNSELECTChanging the unit’s settings