Panasonic DMR-EH80V Operating Instructions Manual

Contents

21ENTERRETURN12.1. Mi 14:55Postal Code0 9~Current Country: GermanyGUIDE Plus+ setupAuto-Setup of the GUIDE Plus+ systemIn order to receive data, the country, date and time of your current location must beset in the basic settings of the unit. When the unit is first set up, the Auto-Setup menufor the GUIDE Plus+ system will appear after the station search or theautomatic station configuration (Q Link).You can not setup the GUIDE Plus+ system if the clock is not set.Auto-SetupNoYesDo you want to setupthe GUIDE Plus+ system ?ENTERRETURNSELECTTo set up the GUIDE Plus+ system, use to select [Yes] and press ENTER.If you do not want to setup, select [No]. You can perform the Setup at a laterpoint in time by launching the GUIDE Plus+ system.Enter the Postal Code of your location with or the number buttons on the remotecontrol and press ENTER.Should your Postal Code change, you can update this information at a later point intime in the Setup of the GUIDE Plus+ system.Use to select [Yes] and press ENTER. The GUIDE Plus+ data is loaded.This takes approximately 2 hours. If [No Data] appears for a station after the loadingprocedure, check the settings in the Editor of the GUIDE Plus+ system.Select [No] if you do not want to load the GUIDE Plus+ data.You can load the GUIDE Plus+ data at a later point in time using the Setup ofthe GUIDE Plus+ system.The GUIDE Plus+ data are loaded automatically when you leave your unitin standby mode for 24 hours.78798078