Panasonic DMR-EH80V Operating Instructions Manual

Contents

23DVD RecorderConnecting a Set Top Box, satellite receiver, decoderYou can connect a Set Top Box to receive digital terrestrial signals (DVB-T),a Satellite receiver (digital / analogue) or a decoder for decrypting programmes.Disconnect the power from all units.Connect the external device with a 21-pin Scart cable to the AV2 connectionof the DVD Recorder.1Connect the DVD Recorder and the external device to the power supply.221-pin Scart socket21-pin Scart cableAC mains leadAV2 1122External deviceExternal devicesChanging the settings in the SETUP menu when connecting a decoder! Press FUNCTIONS in stop mode.! Use to select [To Others] and confirm with ENTER.! Use to select SETUP and confirm with ENTER.! Use to select [Connection], , to select [AV2 Settings] and confirmwith ENTER.! In the next screen, use to select [AV2 Connection] and confirm with ENTER.! Use to select [Decoder (D/H) (DVD / HDD) or (VHS)] and confirm with ENTER.! Press RETURN and use to return to [Connection].= Extra equipment for the connections shown! Use to select [Tuning], , to select [Manual] and confirm with ENTER.! Use to select an encrypted station and press ENTER.! In the Manual Tuning sub-menu, use to select [Decoder] and ,to select [On].! Confirm the setting with ENTER.107HDD/DVD OUTTuningDiscPictureSoundDisplaySETUP AV2 SettingsConnectionAV2 Input RGB/VideoAV2 Connection ExtExt Link AV2 ConnectionDecoder (D/H) (DVD / HDD)Decoder (VHS)RETURNSELECTENTERExtOthers9581617PosName89516171819PosNameChannelFine TuningManualTuning1ARDAuto7DecoderAudio ModeRETURNCHANGEENTEROnBGMono OffTitle Page 301Tuning ManualVideo System PALAC IN~AC mains leadAV-Link functionTo switch between television reception and signal from the DVD recorder.! DVD recorder signal: Press 0 + ENTER. DVD appears in the display.! Television reception: Press the buttons again. TV appears in the displayEE