If the audio output of the other device is mono, connect it to the L/MONO socket.Both the left and the right channels will be recorded if the connection is made viathe L/MONO socket.Connecting to the AV3 input sockets (e.g. Camcorder)= Extra equipment for the connections shownBefore you connect the DV cable, make sure that the power to both devices is turned off.Before you connect the cable, make sure that the power to both devices is turned off.After you have connected the cables, switch both devices on.SD CARDDV OUT= Extra equipment DV cableExternal devices25! Connect the DV output of the DV unit (e.g. digital camcorder) to the DV input socket ofthe DVD Recorder.Use the DV cable.! After you have connected the cables, switch both devices on.The DVD Recorder cannot be controlled by the connected DV unit.The DV input of this unit is only intended for DV units. A computer e.g. cannot be connected.Some DV units do not allow for proper input of the picture and sound signal.DV-IN connectionDV unit (example)DV-IN Front connectionDV INEEVIDEO IN L/MONO - AUDIO IN - RVHSEXT LINK EXT LINKDVDAV3S VIDEO INDMR-EH80VPanasonic/ /A B CABCYellow (Video)White (L)Red (R)Audio/Video cableVIDEO IN L/MONO - AUDIO IN - RVHSEXT LINK EXT LINKDVDAV3S VIDEO INDMR-EH80VPanasonic/ /ABWhite (L)Audio cable (L/R)S VIDEO -cableRed (R)A BChoose one of the two connection possibilities.Connection with S VIDEO cable and audio cable (L/R) produces the best quality.EE