Getting started19VQT0N92Change the remote control code on the main unit and on the remotecontrol (the two must match) if you place other Panasonic productsclose together. When changing the remote control code, make surethe two codes are same.Use “1”, the factory set code, under normal circumstances.[1] While stoppedPress [FUNCTIONS].[2] Select “OtherFunctions” with [3, 4]and press [ENTER].[3] Select “SETUP” with[3, 4] and press[ENTER].[4] Select “Setup” with [3, 4] and press [2, 1].[5] Select “Remote Control Code” with [3, 4] andpress [ENTER].[6] Use [3, 4] to select the code (1, 2 or 3) andpress [ENTER].≥The code on the unit has been set.[7] While pressing [ENTER], press and hold forabout 2 seconds the numeric button ([1], [2] or[3]) corresponding to the code you selected instep 6.≥The code on the remote control has been set.[8] Press [ENTER].∫ When the following indicator appears on the unit’sdisplayThe unit’s remote control codeChange the code on the remote control to match the main unit’s code(l step 7).∫ To return to the previous screenPress [RETURN].∫ To exit the screenPress [RETURN].To turn the TV on/off, change the TV input mode, select the TVchannel and change the TV volume by means of this remote control,set the remote control as follows.Point the remote control at the TVWhile pressing [Í POWER TV], enter the codeusing the numeric buttons.e.g., 01: press [0] > [1].Manufacturer and Code No.≥Test by turning on the TV and changing channels. Repeat theprocedure until you find the code that allows correct operation.≥If your TV brand is not listed or if the code listed for your TV doesnot allow control of your TV, this remote control is not compatiblewith your TV.You do not have to change the setting when connected to a 4:3standard aspect TV that is not compatible with progressive output.(l 64)[1] While stoppedPress [FUNCTIONS].[2] Select “Other Functions” with [3, 4] and press[ENTER].[3] Select “SETUP” with [3, 4] and press [ENTER].[4] Select “TV Screen” with [3, 4] and press[2, 1].[5] Select “TV Type” with [3, 4] and press[ENTER].≥Aspect 4:3/Aspect 16:9:≥480p/480i:Select “480p” if the TV is compatible with progressive output.[6] Use [3, 4] to select the item and press[ENTER].∫To return to the previous screenPress [RETURN].∫To exit the screenPress [RETURN].STEP 4 Set up to match your TV and remote controlPreparation≥Press [DVD].∫ When other Panasonic products respondto this remote controlDVD Disc Protection OffDVD-RAMFUNCTIONSScheduleDubbingDIRECT NAVIGATORSCHEDULE123 VCR Plus+Other FunctionsPlaybackENTERDUBBINGPLAYLISTSFLEXIBLE RECORDINGDISC MANAGEMENTReturnSETUPCartridge Protection Off∫ TV operationPanasonicNationalQUASAR01, 02PHILIPS (RC-5) 03RCA 05SAMSUNG 14, 18, 19FISHER 10 SANYO 10GE 05 SHARP 06, 07GOLDSTAR 15, 16, 17 SONY 08HITACHI 12 SYLVANIA 03JVC 11 THOMSON 05LG 15, 16, 17 TOSHIBA 09MAGNAVOX 03 ZENITH 04MITSUBISHI 13∫ Selecting TV typeAspect 4:3 & 480i4:3 TV16:9 Widescreen TVChannelSetupDiscVideoAudioDisplayTV ScreenAspect 4:3 & 480pAspect 16:9 & 480iAspect 16:9 & 480pTV TypeSETUPENTER4:3 16:94:3 standard aspect TV 16:9 widescreen TVGetting started