Panasonic DMR-ES30VS Operating Instructions Manual

Also see for Diga DMR-ES30V: Operating instructions Quick setup guide Operating instructions Operating instructions Operating manual

Contents

Recording29VQT0N92≥When connecting a cable TV box or satellite receiver, select thechannel on the cable TV box or satellite receiver before scheduledrecording starts.[1] Press [SCHEDULE].≥Make sure “New Scheduled Recording” is selected.[2] Press [ENTER] to move and change the itemsusing [3, 4, 2, 1].≥You may use the numeric buttons to enter “Channel”, “Date”,“On”, and “Off”.≥Channel (Program Position/TV Station Name)≥DateYou can also make a daily or weekly program.Each daily or weekly program is counted as one program.≥On (start time)/Off (finish time)The time increases or decreases in 30-minute increments ifyou hold down the button.≥Mode (Recording mode)You can also press [REC MODE] to change the recordingmode.XP,.SP,.LP,.EP,.FR,.XP... (l 25)≥Title NamePress [2, 1] to select “Title Name” and press [ENTER](l 32).[3] Press [ENTER] when you have finished makingchanges.≥“ ” lights on the unit’s display.≥“Invalid Entry” is displayed when you enter the wrong item.Reenter the item.≥Make sure that the scheduled recording has been programmedcorrectly on the SCHEDULE LIST screen (l right).≥To continue programming:Select “New Scheduled Recording” and repeat steps 2–3.[4] Press [RETURN].∫ To stop recording while a program is workingPress [∫, STOP], then press [ENTER] within 5 seconds.≥You can also press and hold [∫] on the DVD of the main unit for 3or more seconds to stop recording.Note≥When the unit is carrying out a scheduled recording, you mayutilize playback.≥When the disc is not inserted, the disc is full or a non-recordabledisc is inserted, the warning message appears because scheduledrecording is disabled.≥“ ” flashes when the unit cannot perform scheduled recording(non-recordable disc or protected disc, etc.). Check the disccarefully.≥The actual time recorded may be longer than the program itselfwhen TV programs are recorded using VCR Plus_ system.≥When recording more than one program in a row, for DVD-RAM thefirst few seconds, and for DVD-R, DVD-RW (DVD-Video format) or+R about the first 30 seconds of all programs from the second oneonwards will not be recorded.≥If you set “DST” (Daylight Saving Time) to “ON” when manuallysetting the clock (l 46), scheduled recording may not work whensummer switches to winter and vice versa.Even when the unit is turned off, you can display the scheduledrecording list by pressing [SCHEDULE].Preparation≥Press [DVD].[1] Press [SCHEDULE].Icon explanations (A)¥ Currently recordingW Programs are overlapped. Recording of the program with thelater start time starts when the earlier program finishesrecording.n You stopped a weekly or daily scheduled recording. The icondisappears when the next scheduled recording starts.F The disc was full. (not enough space)The TV program may not be recorded due to copy-protect.X Recording stopped (Dirty disc, etc.)Check (B)OK: Recordable# (Date): The last day of daily or weekly recording.!: It may not be possible to record because:≥the disc is write-protected≥there is no more space left≥the number of possible titles has reached its maximum.[2] Press [3, 4] to select the program.≥You may also select program by inputting a 2-digit numberusing the numeric buttons.e.g.: “5”: [0] )[5]“15”: [1] )[5]≥Press [2, 1] to move to the preceding or following page.[3] Press [CANCEL/RESET, ¢] to delete,You cannot delete programs that are currently recording.or press [ENTER] to change.The scheduled recording setting screen appears.[4] If you pressed [ENTER] in step 3,Use [3, 4, 2, 1] to change and press [ENTER].[5] Press [RETURN].For your reference≥Programs that failed to record are not deleted from the listimmediately (indicated in gray), but are deleted from the listautomatically at 4 a.m. 2 days later.≥During scheduled recording, you can change the end time as longas the recording mode is not “FR”.∫ Manual programmingSCHEDULELIST Remaining Recording Time 4:00 LP12:57 PM7/13 TueMode CheckOffOnNo Channel Date7/ 20 Tue01 SP OK11:00 PM10:00 PM39New Scheduled RecordingNew ScheduledRecording isselected.SCHEDULEDRECORDINGRemaining Recording Time 4:00 LP12:53 PM7/13 TueModeOffOnChannel DateTitle NameP ENTER t t: :Check, change or delete programsSCHEDULELIST Remaining Recording Time 4:00 LP12:57 PM7/13 TueMode CheckOffOnNo Channel Date7/ 6 TUE01 SP OK21:00 PM20:00 PM39 New Scheduled RecordingA BDVDRecording