Panasonic DMR-ES30VS Operating Instructions Manual

Also see for Diga DMR-ES30V: Operating instructions Quick setup guide Operating instructions Operating instructions Operating manual

Contents

Recording28VQT0N92[RAM] [-R] [-RW‹V›] [+R]∫ Scheduled recording automatically starts at the settime.≥Scheduled recording can be started whether the unit is turned on oroff. When the unit is turned off, the sound and the video cannot beoutputted to the TV.∫ Scheduled recording for TV programs cannot beexecuted on both DVD and VHS at the same time.Make sure the scheduled recording start times do not overlap onboth DVD (l 29) and VHS (l 53) Scheduled Recording Listscreens.When the scheduled recording settings overlap:≥When the start time of both scheduled recordings is the same, thescheduled recording of DVD has priority.≥When the same tuner channels are specified in scheduledrecordings on both DVD and VHS, only one scheduled recordingcan be started.≥When the interval between the first scheduled recording and thesecond scheduled recording on DVD is 1 minute or less as shownbelow, the second scheduled recording on DVD has priority overthe scheduled recording on VHS even if its start time is later thanthe scheduled recording on VHS.When the scheduled recording settings of DVD and VHS areoverlapped, the setting of DVD takes priority.≥“ ” lights on the unit’s display of both sides in the standby mode.When the recording starts, “ ” on the recording side (DVD side)remains lit and the “ ” on the other side (VHS side) starts flashing.You can enter up to 16 programs a month in advance.Preparation≥Release protection (disc l 30, cartridge l 30) [RAM].≥Insert a disc (l 8) and confirm there is sufficient empty space forrecording on it (l 47).≥Check that the clock is set to the correct time.≥Press [DVD].Entering the PlusCode® numbers is an easy way of scheduledrecording. You can find these codes in TV listings in newspapers andmagazines.≥When connecting a cable TV box or satellite receiver, the VCRPlusi system does not work. Program the scheduled recordingmanually (l 29).[1] Press [VCR Plus_].[2] Press the numeric buttons to enter thePlusCode number.≥Press [2] to move back to correct a digit.[3] Press [ENTER].≥Confirm the program and correct it if necessary using [3, 4,2, 1] (“Manual programming” l 29, step 2).≥When “XP” is displayed in the unit’s display, the recordingmode automatically changes to “FR” in order to prevent loss ofrecording when there is not enough space. Change to “XP”mode if you want to set scheduled recording using “XP” mode.≥“Invalid Entry” is displayed when you enter the wrong PlusCodenumber. Reenter the PlusCode number.≥To enter the name of the programPress [2, 1] to select “Title Name” and press [ENTER](l 32).[4] If the program is correctPress [ENTER].≥“ ” lights on the unit’s display.≥Make sure that the scheduled recording has been programmedcorrectly on the SCHEDULED LIST screen (l 29).≥Repeat steps 1–4 to program other recordings.[5] Press [RETURN].∫To stop recording while a program is workingPress [∫, STOP], then [ENTER] within 5 seconds.≥You can also press and hold [∫] on the DVD of the main unit for 3or more seconds to stop recording.NoteRefer to Note in Manual programming (l 29).Preparation≥Press [DVD].Cautions for using scheduled recordingon DVD and VHSSKIP/INDEX SLOW/SEARCHREW FFPLAYSSCHEDULEOPERATIONSELECTDVD ERASEREC REC MODE ADD/DLTPOWERTIME SLIPFUNCTIONSDIRECT NAVIGATORTOP MENU VHS MENURETURNCM SKIPCANCEL/RESETVOLUMECHINPUT SELECTSTATUSDISPLAYAUDIOTVTV/VIDEOVHS DVDTRACKING/V-LOCKSUB MENUDVD/VHS POWERVCR Plus+COPYINGVHS DVDCREATECHAPTER VCR/TVJET REWSCHEDULEREC MODERETURNDVDVCR Plus+CANCELDVDRETURNVCR PlusiSCHEDULEREC MODE∫3, 4, 2, 1ENTERNumericbuttons1 minute4 CH10 CH2 CHVHSDVDScheduled Recording∫ Using VCR Plus_ systemVCR Plus+ Remaining Recording Time 4:00 LP12:53 PM7/13 TueSCHEDULEDRECORDINGRemaining Recording Time 4:00 LP12:53 PM7/13 TueModeOffOnChannel Date39 7/20 Tue 11:00 PM10:00 PM SPTitle NameP ENTER t tDVD