Convenient functions43VQT0N92This description shows the initial settings for the unit. Fordetails on menu operation. (l 42)≥Underlined items are the factory default settings.≥ indicates settings effective for both DVD and VHS.≥ indicates settings effective for DVD only.∫ ChannelSignal Source (RF IN) (l 17)Select to suit the type of antenna you are using.[Antenna] [CableTV]Set Channels Automatically (l 17)Preset Channel Captions (l 18)Manual Channel Captions (l 18)VCR Plusi Ch. Setting (l 17)∫ SetupOff TimerSelect how long the unit remains on when it is not being used.[2 Hours] [6 Hours] [Off]Remote Control Code (l 19)[Set Code 1] [Set Code 2] [Set Code 3]Clock SettingsPress [ENTER] to show the following settings.Set Clock Automatically (l 46)Set Clock Manually (l 46)Adjust Time Zone (l 46)This corrects the time set in Auto Clock Setting.The status is not displayed on the Set Up menu when the AutoClock Setting is not set.[j1] [0] [i1]Quick Start1 Sec. Quick Start for Recording on DVD-RAM°° From the power off state, recording on DVD-RAM starts about 1second after first pressing the [Í, DVD/VHS POWER] and thensequentially pressing the [¥, REC] (Quick Start Mode).Power consumption is also higher when the unit is turned off if this isset to “On”.[On] [Off]Restore Default SettingsThis returns SETUP menus to default settings, except for the clock,channel settings, ratings level, and on-screen language.[Yes] [No]∫DiscSettings for PlaybackPress [ENTER] to show the following settings.Ratings (l 42)Set a ratings level to limit DVD-Video play.Setting ratings (When level 8 is selected)[8 No Limit]: All DVD-Video can be played.[1] to [7]: Prohibits play of DVD-Video with correspondingratings recorded on them.[0 Lock All]: Prohibits play of all DVD-Video.Changing ratings (When level 0 to 7 is selected)[Unlock Recorder] [Change Password][Change Level] [Temporary Unlock]Play DVD-Audio in Video ModeSelect “Video Mode (Video On)” to play DVD-Video content onsome DVD-Audio.[Video Mode (Video On)] [Audio Mode (Video Off)]Audio Language[English] [French] [Spanish] [Original] [Other ¢¢¢¢]Subtitle Language[Automatic] [English] [French] [Spanish] [Other ¢¢¢¢]Menu Language[English] [French] [Spanish] [Other ¢¢¢¢]Choose the language for audio, subtitles and disc menus. [DVD-V]≥If a language which is not recorded is selected, or if languagesare already fixed on the disc, the language set as the default onthe disc will be played instead.OriginalThe original language of each disc will be selected.Other ¢¢¢¢This is the language code setting.Input a code number with the numeric buttons. (l 45,“Language code list”)AutomaticIf the language selected for “Audio Language” is not available,subtitles of that language will automatically appear if available onthe disc.Settings for RecordingPress [ENTER] to show the following settings.Recording Time in EP ModeSelect the maximum number of hours for recording in EP mode(l 25, “Recording modes and approximate recording times”).[EP-Extended Play (6H)] [EP-Extended Play (8H)]Summary of settings///Video Mode(Video ON)The setting returns to “Audio Mode (Video Off)”when you change the disc or turn the unit off.EP-ExtendedPlay (6H)You can record for 6 hours on an unused 4.7 GBdisc.EP-ExtendedPlay (8H)You can record for 8 hours on an unused 4.7 GBdisc.DVDConvenientfunctions