Panasonic DMR-HWT250 Operating Instructions Manual

Panasonic DMR-HWT250 Operating Instructions Manual Manual pdf 24 page image

RecordingSQT099324Recording TV programmesRecordingTo convert the recording mode after recordingin DR modeRefer to “File Conversion”. (> 38)To confirm whether the conversion iscompletedRefer to “To confirm whether the conversion iscompleted”. (> 39)To cancel a conversionRefer to “To cancel a “During standby”conversion”. (> 39)• If a timer recording reaches its start time when all tunersare being used for recording, the recording (OTR) of one ofthe programmes terminates.• Digital teletext will not be recorded.• Following contents or media cannot be played back whilerecording.- video file- photo- USB HDD (For data files, > 8) and USB memory• Copying cannot be performed while recording.• When “Automatic Standby after OTR” is set to “On” (> 64),this unit is turned to standby mode if this unit is notoperated for approximately 5 minutes after completing“Automatic Stop” or “Recording Time”.The titles can only be recorded to built-inHDD and cannot be copied from built-in HDDto the media other than USB HDD.• This unit can record two programmes beingbroadcasted at the same time.1 Select the channel to record.2 Press [REC MODE] and select theconversion mode, then press [OK].• This unit will record the programmes in DRmode once, and then automaticallyconvert to the selected recording modewhile this unit is in standby.• Recording mode (> 8)• The conversion mode set here is usedas an initial value for the next recording.3 Press [REC ¥].Recording will start.4 Select “Automatic Stop”, then press[OK].• One touch recording (OTR)Recording stops automatically when theprogramme ends.HGHXHEHLHMXPSPLPEPOff (DR)Conversion Mode SettingOKRETURNHDD Remain (DR)mhHighDefinitionData SizeLargeSmallLargeSmallStandardDefinitionAutomatic Stop (Guide Link) at 8:45REC1/OTRRecording TimeContinuous recording30 min8:00 - 8:45To set the recording time1 Select “Recording Time” or “Continuousrecording” in step 4 (> left).Recording Time:You can set the length of recording time from30 minutes to 4 hours.• You can select the recording time with[2, 1].2 Press [OK].